Kameleon C6_v10.qxd 5/14/03 9:16 AM Page 19
ADVANCED OPTIONS
•THE LEARNING FEATURE IS DEVICE MODE
YOU CAN PLACE ONE LEARNED FUNCTION PER DEVICE MODE ON THE SAME KEY.
•THE
•YOU CAN OVERRIDE A LEARNED FUNCTION BY PROGRAMMING A NEW LEARNED FUNCTION ON THE SAME KEY.
Introduction
•LEARNING SHOULD NOT BE DONE IN DIRECT SUNLIGHT OR UNDER INCANDESCENT LIGHTS.
•MAKE SURE YOU ARE USING FRESH BATTERIES WHEN USING THE
LEARNING FEATURE.
•WHEN CHANGING BATTERIES, YOUR LEARNED FUNCTIONS WILL BE RETAINED.
ABOUT THE LEARNING FEATURE
•Some device functions are not learnable, including those with
•You will be able to transfer only one function at a time from your original remote to your
•To perform a sequence of Learned Functions, you can program Macros. See “Creating Other Macros” on page 20.
Deleting a Learned Function
You can delete a single learned function or all learned functions for a certain device mode.
TO DELETE A SINGLE LEARNED FUNCTION
1.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.
2.Press 9 7 6 on the keypad. The bottom of the IR indicator will blink twice.
3.Press the Custom Key that holds the func- tion you wish to delete.
4.Lastly, press the Custom Key again to con- firm deletion.
TO DELETE ALL LEARNED FUNCTIONS WITHIN A CERTAIN DEVICE MODE
1.Press Setup for at least 3 seconds. The bot- tom of the IR indicator will blink twice.
2.Press 9 7 6 on the keypad. The bottom of the IR indicator will blink twice.
3.Press the device mode key in which you want to delete all functions.
4.Lastly,press the device mode key again to con- firm.
Manufacturer Codes Glossary\Trouble Shooting Advanced Options Programming Remote Batteries\Keypad Overview
The Learning Feature 19