X10 Wireless Technology IR10A owner manual Macros Main Keys, Learning Side Keys

Macros - Main Keys, cont.

Before learning the second key in the Macro, you can if desired, set a delay (1-10 secs) after which the command stored in the Macro will be sent. For example your TV might require a few seconds after turning it on before it will respond to a Channel Up/Down command. (Repeatedly press the Side Key next to Set Delay, or enter the delay directly with the numeric keys, 0-9).

In this case let’s set a 1 second delay between commands. Then point your existing remote at the bottom of the IR10A remote and press OK when you’re ready.

You then press the second key on your original remote that you want to add to the Macro.

When success is displayed you can continue adding keys to the Macro, and then press Done when you’re finished.

20

Learning Side Keys

At the Home screen press the Side Key next to Learn.

Then press any of the Side Keys K1- K5 to the left of the screen.

Select the device you want to learn keys for. In this example we only have a TV, Cable Box and Satellite Receiver set up, so the rest are grayed out, but you can still select any of the devices to learn commands for. In this case we selected TV.

Some typical “extra” keys are already set up, (depending on the Mode you se- lected), the rest of them are called L6, L7, L8, etc., 27 keys in total. (You can rename them later). Press the Side Key that you want to learn a command under. (Note can choose one that already has a name, so as to “learn over it” and then later rename it). Let’s select L7.

21