X10 Home Control
If you own or purchase an X10 IR Command Console, Model IR543 and X10 Lamp, Appliance, and Wall Switch Modules you’ll be able to control lights and appliances from your IR10A iconRemote. You point the iconRemote at the IR543, it receives IR commands and converts them to X10 commands. Refer to page 34 and set up code 0401 under AUX (or any other mode you prefer). Then in AUX mode (for example) press a number button on the iconRemote corresponding to the X10 Module you want to control, then press CHANNEL + to turn the module on, CHANNEL – to turn it off, VOLUME + to brighten Lamp and Wall Switch Modules, and VOLUME – to dim them. You can also press the POWER button to turn on ALL lights connected to Lamp and Wall Switch Modules and press MUTE to turn off all your X10 modules (including Appliance Modules).
Troubleshooting
The Favorites you set up don’t operate your device.
•Make sure you selected the correct device (TV, Cable, Sat, etc., when you set up each favorite. See Add/Edit Favorites page 29 to change the device type for your favorite(s).
The Remote’s hard keys do not operate your product.
•Make sure the remote is set to the correct Mode by pressing the MODE key follow by the appropriate Side Key for the device mode you desire.
•Program the remote with a new code.
•The remote may not contain the code for your device. Try learning the codes you need from your old remote.
•Install new batteries.
The remote does not operate some features of your product.
•Program the remote with a new code.
•The remote may not be able to operate all features of your product or key names might be different than your product. Try learning codes from your old remote.
38
Troubleshooting, cont.
Having problems with learning?
•See Learning Tips on page 16.
•If some learned keys transmit multiple times, e.g. if a learned Channel Up key changes more than one channel when you press it, or Up/Down/Left/Right navigation keys move more than one step when you press the learned key; try just giving the key to be learned a quick press (when you learn it) rather than holding the key pressed until the screen displays Success.
Your TV turns on when you press a Favorite key.
•Some types of TV, e.g. Philips flat panel TVs turn on and go to the selected channel when you press a channel number while the TV is off. So for this type of TV pressing a favorite key will do the same thing (but it might not work for 3 digit channels, e.g. 550).
Forgot your KidSafe code?
•Just remove and reinsert the batteries to reset KidSafe (but don’t let your Kids see this Owner’s Manual).
12 Month Limited Warranty
X10.com, a division of X10 Wireless Technology, Inc. (X10) warrants X10 products to be free from defective material and workmanship for a period of one (1) year from the original date of purchase at retail. X10 agrees to repair or replace, at its sole discretion, a defective X10 product if returned to X10 within the warranty period and with proof of purchase. If service is required under this warranty:
Call
For help or more information on setup, please visit:
http://www.x10.com/support
39