Setting up more, cont.
Renaming Favorite Groups
This lets you Rename the groups that you save your favorites in. For example you might want to rename His to Dave, or Hers to Isabel.
Press the HOME key, select Setup, and then select Favorites. Then at the screen to the right select Rename.
Note, none of the groups are grayed out so you can even rename groups that don’t yet have any favorites set up in them. Pick the group that you want to Rename, e.g. His.
You enter the new name for the favorites group using the numeric keys on the remote, in a similar fashion to typing in text on a cell phone. E.G. in this example we pressed the 3 key on the remote to enter the letter “D.” Then we pressed the 2 key repeatedly until the letter “a” was displayed. Then we waited a second and repeatedly pressed 8 to select “v.” Then we waited a second and repeatedly pressed the number 3 key until “e” was selected.
When you’ve entered the new name, press OK to save the new name for the favorites group.
32
Setting up more, cont.
Clearing Settings in the Remote
This lets you clear (erase) various things you’ve set up in the remote.
Press the HOME key, select Setup. Then at the screen to the right select Clear Settings.
Pressing the Side Key next to Devices lets you clear the settings, i.e. codes, for various Devices (TV, VCR, etc.). After selecting Devices, you select the device you want to clear. Only devices that you have set up are shown. All other devices that have not been set up are grayed out.
Pressing the Side Key next to Favorites lets you select a group, e.g. His, Hers, etc., and then clear ALL the favorites you had set up in that group of favorites. Only groups that you have set up favorites in are shown. All other groups are grayed out.
Pressing the Side Key next to Learned lets you select a device (TV, VCR, etc.) that you had previously learned commands and/or Macros under and clear everything that was learned. Only devices that you have learned commands and/or Macros under are shown. All other devices are grayed out.
Pressing the Side Key next to Punchthrough lets you clear any Punchthrough commands you had set up for a device. Only devices that you have set up Punchthrough for are shown. All other devices are grayed out.
Pressing the Side Key next to Master Clear lets you clear EVERYTHING in the remote. Be careful when selecting this. Note however that ALL the sections above display a warning screen allowing you to change your mind before actually clearing anything.
33