Setting the clock (Remote control only)
In this example, the clock is set for the
1Press the ON/STANDBY button to turn the power on.
2 Press the CLOCK button.
3 Within 10 seconds, press the ENTER button. To adjust the day, press the or button and then press the ENTER button.
4 Press the or button to select
The |
(0:00 - 23:59) |
The |
(AM 12:00 - PM 11:59) |
The |
(AM 0:00 - PM 11:59) |
5To adjust the hour, press the or button and then
press the ENTER button. Press the or button once to advance the time by 1 hour. Hold it down to ad- vance continuously.
6To adjust the minutes, press the or button and then press the ENTER button. Press the or button once to advance the time by 1 minute. Hold it down to advance the time by 5 minutes interval.
To confirm the time display:
Press the CLOCK button. The time display will appear for about 5 seconds.
Note:
When power supply is restored after unit is plugged in again or after a power failure, reset the clock.
To readjust the clock:
Perform “Setting the clock” from step 1.
To change the
1Clear all the programmed contents. [Refer to “Factory reset, clearing all memory” on page 19 for details.]
2Perform “Setting the clock” from step 1 onward.
Listening to Bluetooth enabled devices
■■ Bluetooth
Bluetooth wireless technology is a
This unit supports the following:
Communication System: Bluetooth Specification version 2.1 Bluetooth + Enhanced Data Rate (EDR).
Support Profile : A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile)
Notes when using unit with a mobile phone
●● This unit cannot be used to talk over the telephone even when there is a Bluetooth connection made to a mobile phone.
●● Please refer to the operating manual supplied with the mobile phone for details on operation of your mobile phone while transmitting the sound using a Bluetooth connection.
■■ Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they can exchange data. This unit can memorize up to a maximum of 99 devices. Once paired, it is not necessary to pair them again unless:
●● pairing is made with more than 99 devices. Pairing can only be made one device at a time. If subsequent de- vice is paired, the oldest device paired will be deleted and replaced with the new one.
●● this unit is reset. All pairing information is deleted when unit is reset.
●● pairing information is deleted while
Indicator | Condition | Bluetooth status |
| Blinks | In waiting or pairing mode |
| Lights up | Connected |
No indication | Unconnected |
However, the indication status is not displayed during Bluetooth standby mode.