Listening to a CD or MP3/WMA disc (continued)
■■ Repeat play
Repeat play can play one track, all tracks or a programmed se- quence continuously.
To repeat one track:
Select desired track using the 
or 
button.
Press the PLAY MODE button repeatedly until “Repeat One” ap- pears. Press the 
/
(CD 
/
) button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “Repeat All” ap- pears. Press the 
/
(CD 
/
) button.
To repeat desired tracks:
Perform steps 1 - 5 in “Programmed play” section on this page and then press the PLAY MODE button repeatedly until “Repeat All” appears.
To repeat one folder:
While in Folder mode on (MP3/WMA), press PLAY MODE button repeatedly until “Repeat Folder” appears. Press the 
/
(CD 
/
) button.
To cancel repeat play:
Press the PLAY MODE button repeatedly until “Normal” appears and “
” disappears.
Caution:
After performing repeat play, be sure to press the 
button. Otherwise, the disc will play continuously.
■■ Programmed play (CD)
1While in the stop mode, press the MEMORY button on the remote control to enter the programming save mode.
2Press the 
or 
button to select the desired track.
Selected track number
3Press the MEMORY button to save the track number.
4Repeat steps 2 - 3 for other tracks. Up to 32 tracks can be programmed. If you want to check the programmed tracks, during stop mode, press the MEMORY button repeatedly. To clear the programmed tracks, press the CLEAR but- ton.
5Press the 
/
(CD 
/
) button to start playback.
■■ Programmed play (MP3/WMA)
1While in the stop mode, press the MEMORY button to enter the programming save mode.
2Press the PRESET (
or 
) button on the remote con- trol to select the desired folder.
Then press the 
or 
button (remote control) to se- lect the desired tracks.
3Press the MEMORY button to save the folder and track number.
4Repeat steps 2 – 3 for other folder/tracks. Up to 32 tracks can be programmed.
5Press the 
/
(CD 
/
) button to start playback.
To cancel the programmed play mode:
During programmed stop mode, press the 
button. The display will show “Memory Clear” and all the programmed contents will be cleared.
Adding tracks to the program:
If a program has been previously stored, the “MEM” in- dicator will be displayed. During stop mode, press the MEMORY button once. Within 10 seconds, press and hold the MEMORY button again. Then follow steps 2 - 3 to add tracks.
Notes:
●● When the disc compartment is opened, the program is automatically cancelled.
●● If you press the ON/STANDBY button to enter the standby mode or change the function from CD to an- other, the programmed selections will be cleared.
■■ Procedure to playback MP3/WMA disc with folder mode on
To play back
1 In CD function, load an MP3/WMA disc. Press the FOLDER button and disc info will be displayed.
MP3 indicator | TOTAL indicator |
WMA indicator |
Total number of folder Total number of files
2Press the PRESET (
or 
) button to select desired playback folder. (Folder mode on)
FOLDER indicator
FOLDER number First track number in the folder
3Select desired file to be played back by pressing the
or 
button.
4Press the 
/
(CD 
/
) button. Playback will start and file name will be displayed.
●● Title, Artist and Album name are displayed if they are recorded on the disc.
●● In case of playback with the folder mode on, press the PRESET (
or 
) button, and the folder can be selected even though it is in playback/pause mode. It will continue playback/pause mode in the 1st track of the selected folder.
●● Display content can be changed by pressing the DISPLAY button.
File name display 
Folder display
Cou | nte | r display |
| Title display | ||||
|
|
|
| Album display |
| Artist display |
|
|
|
|
|
|
|
|
| ||
Note:
If “Not Support” is displayed, it means “Copyright protected WMA file” or “Not supported playback file” is selected.
