Sharp XL-DAB102DH Listening to a CD or MP3/WMA disc, Disc playback, Various disc functions

Listening to a CD or MP3/WMA disc

ON / STANDBY

■■ Disc playback

1Press the ON/STANDBY button to turn the power on.

2Press the FUNCTION button repeatedly on the main unit to select CD function.

3Press the OPEN/CLOSE button to open the disc compart- ment.

4Place the disc on the disc compartment, label side up.

5 Press the OPEN/CLOSE button to close the disc tray. 6 Press the / (CD /) button to start playback.

To stop playback completely:

●●	Press the	button twice.
Caution:
●●	Do not place two discs in one-disc-tray.
●●	Do not play discs of special shapes (heart, octagon,
	etc). It may cause malfunctions.
●●	Do not push the disc tray while it is moving.
●●	If the power fails wait until the power is restored.
●●	If TV or radio interference occurs during CD operation,
	move the unit away from the TV or radio.
●●	Be sure to place 8 cm (3”) disc in the middle of the
	disc tray.
●●	Due to the structure of the disc information, it takes
	longer to read an MP3/WMA disc than a normal CD
	(approximately 20 to 90 seconds).

Note for CD or MP3/WMA disc:

●● Rewritable multi-session discs with unfinished writing, can still be played.

■■ To resume playback after stopping (resu- me play)

■■ Various disc functions

Function Main	Remote	Operation
unit	control
Play	Press in the stop mode.
Pause	Press in the playback
	mode. Press the
	/	button to resume
	playback from the
	paused point.
Stop	Press twice in the
	playback mode.
Track	Press in the playback or
up/down	stop mode.
	If you press the button
	in the stop mode, press
	the	/ button to start
	the desired track.
Fast	Press and hold down in
forward/	the playback mode.
reverse	Release the button to
	resume playback.

■■ Random play

To random play all tracks:

Press PLAY MODE button on the remote control repeatedly until “Random” appears. Press the / (CD /) button.

To cancel random play:

Press the PLAY MODE button again. “RDM” indicator will disappear.

Notes:

●● If you press the button during random play, you can move to the track selected next by the random operation. However, the button does not allow you to move to the previous track. The beginning of the track being played will be located.

●● In random play, the unit will select and play tracks auto- matically. (You cannot select the order of the tracks.)

You can resume playback from the point playback is stopped.

1While a disc is playing, press the button once. The system stores the point you stopped.

2To resume play, press the CD / button. Playback resumes from the point you stopped.

To cancel the resume playback:

Press the button twice.

Note:

Depending on the disc, playback may resume from slightly before the stopped position.

E-9