Sharp XL-DAB102DH Timer and sleep operation Remote control only, DAB Frequency table Band

Changing the information display (continued)

■■ Memorising a station

You can store 30 DAB stations in memory and recall them at the push of a button. (Preset tuning)

1Tune to the desired DAB station.

2 Press the MEMORY button.

3Within 30 seconds, press the PRESET ( or ) button to select the preset channel number. Store the stations in memory, in order, starting with preset channel 1.

4Within 30 seconds, press the MEMORY button to store that station in memory. If the “MEM” and preset number indicators disappear before the station is memorised, repeat the operation from step 2.

5Repeat steps 1 - 4 to set other stations, or to change a preset station. When a new station is stored in the memory, the station previously memorised for that preset channel number will be erased.

Note

To erase entire preset memory, refer “To erase entire preset memory” on page 12.

■■ DAB Frequency table (BAND III)

Frequency	Label	Frequency	Label
174.928 MHz	5A	208.064 MHz	9D
176.640 MHz	5B	209.936 MHz	10A
178.352 MHz	5C	211.648 MHz	10B
180.064 MHz	5D	213.360 MHz	10C
181.936 MHz	6A	215.072 MHz	10D
183.648 MHz	6B	216.928 MHz	11A
185.360 MHz	6C	218.640 MHz	11B
187.072 MHz	6D	220.352 MHz	11C
188.928 MHz	7A	222.064 MHz	11D
190.640 MHz	7B	223.936 MHz	12A
192.352 MHz	7C	225.648 MHz	12B
194.064 MHz	7D	227.360 MHz	12C
195.936 MHz	8A	229.072 MHz	12D
197.648 MHz	8B	230.784 MHz	13A
199.360 MHz	8C	232.496 MHz	13B
201.072 MHz	8D	234.208 MHz	13C
202.928 MHz	9A	235.776 MHz	13D
204.640 MHz	9B	237.488 MHz	13E
206.352 MHz	9C	239.200 MHz	13F

*Frequencies are displayed to two decimal places on this unit.

Timer and sleep operation (Remote control only)

Timer playback:

The unit turns on and plays the desired source (CD, TUNER, DAB, USB, AUDIO IN, LINE IN) at a preset time.

This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.

Once timer (“” indicator):

Once timer play works for one time only at a preset time.

Daily timer (“DAILY” indicator):

Daily timer play works at the same preset time every day that we set. For example, set the timer as a wake-up call every morning.

Using the once timer and daily timer in combination:

For example, use the once timer to listen to a radio program, and use the daily timer to wake up.

1Set the daily and once timer (pages 16 - 17).

1 minute or more

Daily timer Once timer

Start Stop Start Stop

■■ Timer playback

Before setting timer:

●● Check that the clock is set to the correct time (refer to page 6). If it is not set, you cannot use the timer function.

●● For timer playback: Plug in USB or load discs to be played.

1Press the ON/STANDBY button to turn the power on.

2 Press the TIMER button.

3	Within 30 seconds, press the	or	button to select
4	“Once” or “Daily”, and press the ENTER button.
	Within 30 seconds, press the	or	button to select
	“Timer Set”, and press the ENTER button.

5To select the timer playback source (CD, TUNER,

DAB, USB, AUDIO IN, LINE IN), press the or button. Press the ENTER button.

When you select the tuner or DAB, select a station

by pressing the or button, and then press the ENTER button. If a station has not been programmed, “No Preset” will be displayed and timer setting will be cancelled. To memorise a station, refer “Memorising a station” on page 12 or 16.

6To adjust the day, press the or button and then press the ENTER button.

7Press the or button to adjust the hour, and then press the ENTER button.

8To adjust the minutes, press the or button and then press the ENTER button.

9Set the time to finish as in steps 7 and 8 above.

10Adjust the volume using the VOLUME control, and then press the ENTER button.

11Press the ON/STANDBY button to enter the power standby mode. “TIMER” indicator lights up.

E-16