System connections
Make sure to unplug the AC power lead before making any connections.
To select Line In function:
Press FUNCTION button (main unit) or AUDIO/LINE (IN- PUT) button (remote control) repeatedly until Line in is displayed.
Notes:
●● No sound is heard from the subwoofer without a built- in amplifier.
●● Subwoofer
Audio cable | To TV audio |
(not supplied) | output socket |
Red |
|
Black |
|
To LINE | TV |
input socket |
|
FM/DAB aerial
Left speaker
Installing the supplied FM/ DAB aerial
To right speaker
Wall socket
(AC 100 - 240 V
~ 50/60 Hz)
Commercially available
Subwoofer
(Amplifier
Audio cable (not supplied)
■■ Aerial connection
Supplied FM/DAB aerial:
Connect to the FM/DAB 75 ohms socket and position it where reception is best.
External FM/DAB aerial:
Use an external FM/DAB aerial (75 ohms coaxial cable) for better reception. Disconnect the supplied FM/DAB aerial wire before use.
Note:
Keep the aerial away from the unit or AC power lead to avoid noise pickup.
■■ Speaker connection
+ speaker terminal | red wire |
- speaker terminal | black wire |
●● Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit.
●● Do not mistake the right and the left channels. The right speaker is the one on the right side when you face the unit.
●● Do not let the bare speaker wires touch each other.
●● Do not allow any objects to fall into or to be placed in the bass reflex ducts.
●● Do not stand or sit on the speakers. You may be injured.
Incorrect
■■ Bluetooth standby mode
●● The first time the unit is plugged in, it will enter the Bluetooth standby mode. Bluetooth standby indicator lights up.
●● To cancel the Bluetooth standby mode, press the ECO button (remote control) during power standby mode. The unit will enter the low power consumption mode.
●● To return to the Bluetooth standby mode, press the ECO button again.
■■ AC power connection
After all connections have been made correctly, plug the AC power lead into the wall socket.
Note:
Unplug the AC power lead from the wall socket if the unit will not be in use for a prolonged period of time.
