Listening to Bluetooth enabled devices (continued)
■■ Pairing with other Bluetooth source devices
1Press the ON/STANDBY button to turn the power on.
2Press the FUNCTION button (main unit) repeatedly to select Bluetooth function. “Bluetooth” appears on the display.
3Press and hold the PAIRING button for 3 seconds or more. “Start Pairing” appears on the display. The unit is now in pairing mode and is ready to be paired with other Bluetooth source device.
4Perform pairing procedure on the source device to detect this unit.
Notes:
●● Place the devices to be paired within 1 meter (3 feet) of each other when pairing.
●● Some source devices are unable to display lists of detected devices. To pair this unit with the source device, refer to the source device operating man- ual for details.
5Select
*Passcode may be called PIN Code, Passkey, PIN number or Password.
6“Connected” appears on the display once the unit is successfully paired with the source device. (Pairing information is now memorised in the unit.) Some au- dio source devices may connect with the unit auto- matically after pairing is completed, otherwise follow the instructions in the source device operating manual to start connection.
7Press the play button on main unit, remote control or source device to start Bluetooth streaming playback.
Notes:
●● If a device such as microwave oven, wireless LAN card, Bluetooth device or any other device that uses the same 2.4 GHz frequency is placed near the system some sound interruption may be heard.
●● The transmission distance of the wireless signal be- tween the device and the main unit is about 10 m (32 ‘), but may vary depending on your operating environment. If a steel concrete or metallic wall is between the device and the main unit, the system may not operate at all, because the wireless signal cannot penetrate metal.
●● If this unit or the source device is turned off before Blue- tooth connection is completed, pairing will not be com- pleted and the pairing information will not be memo- rised. Repeat step 1 onward to start pairing again.
●● To pair with other devices, repeat steps 1 - 5 for each device. This unit can memorize up to a maximum of 99 devices. If subsequent device is paired, the oldest device paired will be deleted.
●● Once a device is ousted or deleted from the pairing list, the pairing information for the device is also deleted. To listen to the sound from the device again, it needs to be
●●
Note:
Some music applications do not support this feature, hence there will be no volume synchronisation and no song information will be displayed even if your Bluetooth device supports such profile.
■■ Listening to the sound
Check that:
●● The source device Bluetooth functionality is ON.
●● Pairing of this unit and the source device is completed. ●● Unit is in connected mode.
1Press the ON/STANDBY button to turn the power on.
2Press the FUNCTION button (main unit) repeatedly to select Bluetooth function.
3Start the Bluetooth connection from the Bluetooth stereo audio source device.
4Press the BLUETOOTH 
/
button.
Note:
If the source device has an extra bass function or equalizer function, set them to off to avoid sound dis- tortion.
Note:
Make the Bluetooth connection again if the source device is not turned on, or its Bluetooth functionality is off or is in sleep mode.
■■ To disconnect the Bluetooth device
Perform any of the followings.
–Disconnect the Bluetooth connection on the audio source device. Refer the operating manual supplied with the device.
–Turn off the Bluetooth stereo audio source device.
–Turn off this unit.
Note:
The volume of this unit may not be controlled as intended depending on the device.
■■ Auto power on
During Bluetooth standby mode, the unit will automatically power on when the Bluetooth connection is set up between the main unit and your device.
Note:
This function is not applicable during Bluetooth standby mode off.
