X10 Wireless Technology IR10A owner manual Advanced Settings Advanced Settings, Display Options

Page 18

Advanced Settings

Advanced Settings, cont.

Press the HOME key, then select Setup, then select Advanced.

The screen to the right lets you change the backlight delay; enter codes for devices directly from the printed code list that came with the remote; set up punchthrough for various devices; and limit the channels that young children can access.

Display Options

Select Options, then press a Side Key to the left or the right of the option to adjust the setting. Then press OK. Backlight adjusts how long it takes before the screen goes black (approx 2-35 seconds) if you don’t press any keys.

Key Transmit Time changes the delay between digits when sending favorites, e.g. 1–6–2. This can be used in situations where the channels are not accepted by the set-top box.

You can also change the device type by pressing the key on screen (1) next to the device that you are editing the code for. Pressing this key repeatedly cycles through all available

device types.

Programming Combo Device Codes

Some Combo devices (e.g. TV/VCR, TV/DVD, DVD/VCR, etc.) will require you to set up two different Mode keys to control both parts of the Combo device. For example, if you have a TV/DVD Combo, you might need to set up one code under the TV key to control the TV part AND a separate code (under any other Mode key) to control the DVD part. Other Combo devices have one code that will control both parts of the device. See separate code list.

To set up a combo device, press the HOME key, then select Setup, then select Advanced then Device Codes, as described on previous page.

Punchthrough

Device Codes

(1)

This lets you set up how various keys on the remote operate in

 

 

various modes. For example you might want the Volume Up/

Select Device Codes. Then Select a device.

 

Down and Mute keys to ALWAYS operate your TV, no matter

 

what mode the remote is in. Or you might want the Play, Stop,

Devices that have not yet been set up are

 

 

Pause REW, FF, and Record keys to ALWAYS operate your

grayed out. You can select them here and

 

 

VCR no matter what mode the remote is in.

set them up by entering the device code

 

 

 

from the printed code list. Or you can

 

Press the HOME key, then select Setup, then select Advanced,

change the code for a device that had

 

 

then Punchthrough.

already been set up by simply entering the

 

 

 

new code.

 

Then select the device you want to set up

This screen also lets you view the codes for any device that’s

Punchthrough for. E.G., TV.

 

been set up. In the above example you can see the codes that

 

are set for TV, Cable, and SAT. We’ve selected CD and can

 

then enter its 4 digit code from the code list, using the number

 

keys on the remote. The above also shows that we’ve learned

 

codes under the AUX1 key in DVD mode.

 

 

34

 

35

Page 17 Page 19
Image 18
Page 17 Page 19
Contents IconRemote Table of Contents IntroductionHard Key Functions Hard Key Functions, LCD Liquid Crystal DisplayBattery Saver SetupBattery Installation Using the WizardSetting Up Your Devices How to set up a TVSetting Up Your Devices, Setting Up Your Favorites Setting Up Your Favorites,Using the remote Setting Up Your Favorites, Using The RemoteQuickPower SleepLearning Learning,Learning Main Keys Learning Main Keys,Learning a Macro Main Keys Macros Main Keys, Learning Side KeysLearning Side Keys, Learning Macros Side Keys Learning Macros,Setting up more Setting up more DevicesSetting up more, Setting up more FavoritesAdding/Editing Favorites Reordering Favorites Deleting FavoritesClearing Settings in the Remote Renaming Favorite GroupsProgramming Combo Device Codes Advanced Settings Advanced Settings,Display Options Punchthrough Device CodesPunchthrough, KidSafeMonth Limited Warranty TroubleshootingTroubleshooting, X10 Home ControlIR10A-3/07
Top Page Image Contents