PROGRAMMING CHANNEL CONTROL LOCK
By default, the Cogeco Atlas DVR
NOTE: This feature does not affect the AUD mode.
To Activate Channel Control Lock:
1.On the remote control, press CBL once; it will blink once. Then press and hold SETUP until
the CBL key blinks twice, then release SETUP.
2. Enter 9 - 7- 3. The CBL key will blink twice.
3. Press CH+ once. The CBL key will blink twice.
4.Now, regardless of what mode you select (except AUD), only the channel control capability of your cable converter will be accessible.
To De-Activate Channel Control Lock:
1.On the remote control, press CBL once; it will blink once. Then press and hold SETUP until
the CBL key blinks twice, then release SETUP.
2. Enter 9 - 7- 3. The CBL key will blink twice.
3. Press CH- once. The CBL key will blink four times.
4.Now, the remote control will provide TV and VCR
15