Omega Vehicle Security REC-11 owner manual Dealer Programmable Options

Page 10

5)Within 10 seconds press the LOCK button on the first transmitter you wish to encode to the system. The piezo will sound then beep twice to indicate the transmitter's code is learned by the system. It is only necessary to press the LOCK button.

6)Repeat Step 5 within 10 seconds for each additional transmitter. As each transmitter is learned, the buzzer will sound, which is then followed by beeps indicating the number of the transmitters learned. The system will exit the Transmitter Programming Mode when the ignition switch is turned "off", after 18 seconds of not receiving a transmitter broadcast, or upon learning the fourth transmitter. The exiting of Transmitter Programming Mode is indicated by the piezo or horn sounding twice.

Dealer Programmable Options

Your REC-11 has operational features which may be programmed by the installing dealer. Some of these features enhance the system's operating characteristics, while others are an aid to the installer which allow extreme flexibility in adapting the system to the different design parameters of the vehicle. Please see your dealer more detailed information. The following features affect daily operation:

-Independent Automatic Locking And Unlocking Activated By The Ignition Switch: The system may be configured to automatically lock the doors when the ignition switch is turned "on", and also automatically unlock them when the ignition switch is turned "off". This system allows the unique capability of only automatically locking, and not unlocking them; or, if installed with driver door unlock priority, unlocking only the driver's door when the ignition switch is turned "off". The last

-Activating The Trunk Release Also Unlocks The Doors: This system allows you to make the choice of whether the convenience of using your transmitter to gain trunk or hatch entry will also unlock the doors as part of the same operation. As received from the factory this feature is activated. Even if the vehicle is configured to have the transmitter unlock the driver's first, all of the doors will unlock when the remote trunk release is utilized.

-Automatic Door Locking Operation: This system is capable of performing two forms of automatic door locking if desired, as these features are not activated at the factory.

In the first form, the system will lock the doors automatically 90 seconds after the ignition switch is turned "off". This feature ensures that the doors will become locked every time you exit the vehicle and leave it unattended.

The second form of automatic locking eliminates the accidental unlocking of the doors by the accidental or unknown pressing of the transmitter's UNLOCK button when placing it in a pocket or purse. Activating this feature causes the system to automatically relock the doors 90 seconds after the UNLOCK button is pressed unless the ignition switch is turned "on".

Both automatic locking and automatic relocking add the security of engaging the starter interrupt circuit when the locking is performed at expiration of the 90 second period. During the 90 second period, the LED Status Light will flash rapidly as a visual indication of the impending automatic action. Once the doors have locked and the starter interrupt has engaged, the LED Status Light will slow to a steady flash as an indication and also as a theft deterrent.

Your dealer can activate either or both of these features upon installation.

Page 10

Page 11

Image 10
Contents REC-11 REC-11 Operating Instructions Introduction One or Two Button Operation Default TwoAutomatic Transmitter VerificationTM Panic or 3rd Channel From Button III Default 3rd Channel Transmitter Activated Anti-Carjacking Default OFF15 30 Second Parking Lights Upon Unlock Default 30 Seconds Transmitter FunctionsIgnition Activated Anti-Carjacking Default OFF Transmitter FeaturesD Status Light Confirmation Chirps Default on Operating Trunk Release Also Unlocks Doors Default onDouble Unlock Pulse Default OFF Audible ConfirmationVisual Confirmation Programming Features Valet SwitchStarter Disable Programming Transmitters Steps 4a & 4b only if you have a secret coded valetDealer Programmable Options