REC-11 Operating Instructions
Introduction
The
To learn how to operate your system, this Owner's Operation Manual will begin with Transmitter Functions, then explain the system's other operations as enhanced by the
Automatic Transmitter VerificationTM
You received two remote control transmitters to operate your Remote Keyless Entry System. The system LED will flash two times every time the ignition key is turned “on”. This alert will last 90 seconds for the first 48 hours after a new installation. The alert will shorten to 10 seconds after the first 48 hours. If a new remote is coded into the system the alert will again be 90 seconds for 48 hours. This Patented feature alerts you if someone has covertly added an unauthorized transmitter to your system, and is found only in Omega Research and Development products.
17) One or Two Button Operation: Default Two
This feature allows the unit to be locked and unlocked from two separate buttons or have the unit “toggle” the lock and unlock operations from one button.
List of Programmable Features:
1)Secret Override Code: Default 1&0 Programming Switch Press
2)Doors Automatically Lock 90 Seconds After The Ignition Is Turned “Off” : Default OFF
3)Doors Automatically Relock 90 Seconds After Remotely Unlocking : Default OFF
4)Doors Lock With Ignition “On” : Default ON
5)Ignition “Off” Unlock #1 : Default ON
6)Ignition “Off” Unlock #2 : Default ON
7)Operating Trunk Release Also Unlocks Doors: Default ON
8)Doorlock Pulse Time .8/3 Seconds :Default .8 Second
9)Double Unlock Pulse : Default OFF
10)Audible Confirmation Of Received Transmitter Signal : Default ON
11)The Starter Disable Will Automatically Engage 90 Seconds After The Ignition Switch Is Turned “Off” : Default OFF
12)The Starter Disable Will Automatically Engage 90 Seconds After The Transmitter Is Used To Unlock The Doors : Default OFF
13)Ignition Activated
14)Transmitter Activated
15)30 Second Parking Lights Upon Unlock : Default ON
16)“Panic” / 3rd Channel From Button III : Default 3rd Channel
Page 2 | Page 19 |