Transmitter Functions

14) Transmitter Activated Anti-Carjacking: Default OFF.

This Feature adds Anti-Carjacking protection, and the ignition must be "on" for the Anti- Carjacking to operate. Press and hold the transmitter's II button for 3 seconds. The piezo will

start beeping 53 seconds later, and for the next seven seconds pressing the Valet Switch once will cancel the Anti-Carjacking Feature. At 60 seconds the piezo starts making a siren sound, and the parking and dome lights will also flash. At 90 seconds the starter interrupt output will activate. Once the siren sound occurs and lights flash, Anti-Carjacking cannot be canceled unless the ignition is turned "off", then back "on"; the Valet Switch must be pressed once within 10 seconds of turning the ignition back "on". This is the only way to cancel or turn off the Anti-Carjacking Feature - once activated, the transmitter cannot be used to cancel or turn off the Feature.

15) 30 Second Parking Lights Upon Unlock: Default 30 Seconds.

This feature gives the option of having the parking light output flash twice then illuminate for 30 seconds upon Unlock or have the parking lights only flash twice upon Unlock. To change this feature press the Lock button for the 2 flashes only setting.

16) “Panic” or 3rd Channel From Button III: Default 3rd Channel.

This feature allows button III to operate either “Panic” or 3rd channel. In the default setting holding button III depressed for 4 seconds will activate the 3rd channel output. Panic can be activated from either the lock or the unlock button. Press and hold either button for 5 seconds to activate panic. With this feature off press and hold button III for 5 seconds to activate “panic”. Press the lock and unlock buttons together for 5 seconds to activate the 3rd channel output.

“LOCK” BUTTON

Pressing the LOCK button will lock all of the doors and engage the optional starter interrupt; when held operates “Panic”.

“II” BUTTON

Pressing the II button for 2 seconds will activate remote trunk release (vehicle must be equipped with power trunk release). This operation also unlocks the doors.

Your system may be configured to lock your doors upon turning the ignition "On", and unlock them when the ignition is turned "Off". Your system is capable of being operated by up to four transmitters, which are available from where you purchased your system.

GREEN LIGHT

Illuminates whenever any transmitter button is pressed.

“UNLOCK” BUTTON

Pressing the UNLOCK button will unlock all of the doors and disengage the starter interrupt circuit. Or, if the system is thusly configured, pressing the UNLOCK button once unlocks only the driver's door and pressing a second time will unlock all of the doors. Press and hold to activate “Panic”.

“III” BUTTON

Pressing the III button for two seconds can be used to activate the 3rd Channel Output. This Button may also be configured to activate the “Panic” feature.

Page 18

Page 3