EQUIPMENT CONTROL
TIME MODE:
In Time Mode (normal operation),the Clock will display the actual time of day, and "TIME" will appear on the right of the Display.
It is possible to manually activate the pool equipment while Clock is in Time Mode, by simply pushingthe appropriate Equipment Button. This will temporarily override any preset program which may be in effect.
PROGRAM MODE:
In order to preselect daily equipment operation, the Clock must be switched to Program Mode.
To achieve this, push PROGRAM Button once. Whenever Clock is in Program Mode, "PROG"will appear on the right of the Display.
After programming is complete, the Clock will automatically return to Time Mode.
SETTING THE CLOCK
If the Clock is not already in Time Mode, push PROGRAM Button until "TIME"appears on the right of the Display. This indicates that the clock is now in ~ i m Mode.
Pushthe HOURS and MINUTES Buttons until the correct time of day is displayed.
Pay special attention to the AM/PM indicator.