Service Parts

Troubleshooting

To check the operation of the remote:

1.Make sure receiver batteries are installed properly. If one battery is installed backward, receiver will not operate in remote mode. Be sure battery output is 5.3 volts or more. (Slide switch is independent of battery condition).

2.Be sure the transmitter’s batteries are properly installed and that the battery output is 2.7V or more.

3.Check to make sure the transmitter is communicating with the receiver.

•If the receiver beeps when the MODE button is de- pressed on the transmitter they are communicating.

•If the receiver does not beep when the MODE button is depressed on the transmitter go to Matching Secu- rity Codes.

4.Make sure the transmitter is within the 20 feet range of the receiver.

5.Positioning of the receiver is important. If the receiver is “enclosed” in a metal surround, the operation of the re- ceiver may be affected as noted below. Reposition the receiver to improve operating range. It is suggested that a heat shield be installed to protect the receiver from extreme heat. If the receiver is “enclosed” in a metal surround, this can:

•Cause the RF signal to get lost and not communi- cate with the receiver.

•Cause the working distance to be shorter than nor- mal.

NOTE: A receiver located in an area, where the ambient temperature inside the case exceeds 1300 F, will cause the THERMO-SAFETY feature to cut in, requiring you to reposition the receiver to stop the warning beeps, and to “reset” the receiver’s operation.

Specifications

Batteries: Transmitter - 3V 2 ea.; AAA 1.5V, Alkaline

Receiver: (4) AA I-SV Alkaline Operating Frequency: 433.92MHZ

FCC ID No.’s:Transmitter - ULERF-5A Receiver - ULERF-5A

Canadian IC ID No.’s:

Transmitter - 6732A-RF5A Receiver - 6732A-RF5A

No service parts available.

Limited Warranty

This REMOTE CONTROL SYSTEM is warranted for	incidental or consequential damages. Batteries and
12 months from the date of purchase or installation to	any damage caused by them are not covered by this
the original purchaser to be free from defects in mate-	warranty.
rials and workmanship. Damage to the SYSTEM	Some states, provinces, and nations do not allow
caused by accident, misuse, abuse, or installation	exclusion or limitations of incidental or consequen-
error whether performed by a contractor, service com-	tial damages, so the above limitations or exclusions
pany, or owner, is not covered by this warranty. Seller	may not apply. This warranty gives you specific legal
will not be responsible for labor charges and/or dam-	rights. You may have other rights that vary by state,
age incurred in installation, repair, replacement or for	province or nation.

SMART-BATT-II specifications

Hearth and Home Technologies has revolutionized the way we think about heating technology with its SMART-BATT-II system. This innovative product is designed to enhance efficiency and convenience in home heating. The SMART-BATT-II is a state-of-the-art battery backup system that ensures uninterrupted performance for your heating appliances, providing homeowners with peace of mind during power outages.

One of the standout features of the SMART-BATT-II is its advanced energy management system. This technology optimally manages power supply to the unit, allowing it to utilize energy from both the grid and backup sources. The system can intelligently switch between these power sources, ensuring that your heating appliances remain operational even when the electricity goes out. This capability is especially valuable in areas prone to outages, enabling families to maintain warmth and comfort during inclement weather.

The SMART-BATT-II utilizes high-capacity lithium-ion batteries, which are known for their durability and long life. These batteries provide enough backup power to operate heating systems for extended periods, offering an essential lifeline when traditional power sources are unavailable. The unit is equipped with smart charging technology, ensuring that the batteries recharge efficiently and extend their lifespan.

Another significant characteristic of the SMART-BATT-II is its user-friendly interface. Homeowners can easily monitor the battery status, power usage, and system performance through a simple display screen. Additionally, the system offers remote access capabilities, allowing homeowners to control and manage their heating system from anywhere via smartphone or tablet. This feature significantly enhances user convenience and facilitates better energy management.

Safety is also a priority with the SMART-BATT-II. The system includes built-in safety features such as overcharge protection and thermal management, ensuring that the unit operates safely and efficiently. Hearth and Home Technologies have also designed the SMART-BATT-II to be compact and easy to install, making it suitable for a wide range of home heating systems.

In summary, the SMART-BATT-II by Hearth and Home Technologies represents a significant advancement in home heating technology. With its robust energy management capabilities, high-capacity batteries, and user-friendly features, it provides a reliable and efficient solution for homeowners seeking consistent warmth and comfort. This innovative system is not just a backup; it is a forward-thinking solution designed for the modern home.