Hearth and Home Technologies SMART-BATT-II Transmitter, Remote Receiver Slide Switch

Page 7

NOTE: The remote receiver houses the microprocessor that responds to commands from the transmitter to control sys- tem operation. It emits one beep when it receives an ON or OFF command manually, but no beep when cycling on and off automatically in THERMO mode.

The remote receiver has a 3-position slide switch: OFF/RE- MOTE/ON (see Figure 11).

WIRE

 

TERMINALS

BATTERY

 

COVER

 

LEARNING BUTTON

ON/OFF REMOTE SLIDE SWITCH

Figure 11. Remote Receiver Slide Switch

NOTE: The remote receiver will only respond to the transmitter when the 3-position slide button on the re- mote receiver is in the Remote position. If the system does not respond to the transmitter on initial use, see section Matching Security Codes.

1.With the slide switch in the ON position, the system is on.

2.With the slide switch in the REMOTE position, the sys- tem only operates if the remote receiver receives com- mands from the transmitter.

3.With the slide switch in the OFF position, the system is off.

NOTE: The slide switch should be placed in the OFF posi- tion if you will be away from your home for an extended period of time. Placing the switch in the OFF position also functions as a safety “lock out” by turning the system off and rendering the remote receiver inoperative.

TRANSMITTER

Important: Before operating remote control, transmit- ter and receiver must have matching security codes. See section ‘Matching Security Codes’.

Important: Review ‘Thermo-Safety/Communication-Safety Features’ under ‘Transmitter Safety Features’ section. These signal/temperature safety features shut down the fireplace system when a potentially unsafe condition exists.

Important: Review ‘Auto Shutdown’ section. This safety feature shuts down the fireplace after 9 hours of continuous operation, in ON mode only.

Important: New batteries are essential for proper opera- tion of the multi-function transmitter. The transmitter oper- ates on 2 AAA-size 1.5V batteries. Use Alkaline batteries for longer battery life and maximum operational performance.

Insert 2 AAA-size 1.5V batteries into the battery compart- ment on the back of the transmitter. When the batteries are correctly inserted, the screen will display numbers (see Figure 7 for LCD Display Screen).

NOTE: If the transmitter is activated from a very cold condi- tion it may be necessary to allow the transmitter to stabi- lize to room temperature (could take up to 15 minutes) be- fore accurate room temperatures are displayed on the screen.

NOTE: LCD screen is equipped with a “backlite” for easier viewing of LCD screen. Backlite illuminates when a func- tion button is depressed. After 5 seconds elapses, LCD screen will return to its normal state.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Introductionfccce Requirementsrequirements Installation PrecautionsCanadian Equipment Requirements Hearth Mount Receiver Wiring InstructionsWiring Millivolt Valves Wiring Millivolt Valve with RockerMillivolt with Rocker Switch and Receiver Wiring Millivolt Valve with 3-Wire AssemblyMillivolt with Receiver Wiring Intermittent Pilot Ignition IPI with Rocker SwitchRemote Intermittent Pilot Receiver Ignitor Wiring Intermittent Pilot Ignition IPI with 3-Wire Assembly Transmitter Remote Receiver Slide SwitchOperating Instructions Transmitter SettingsSetting the Clock Matching Security CodesTransmitter Low/Battery Indicator Setting 0F/0C ScaleSetting Desired Room Temperature Thermo Operations Setting the Countdown TimerSystem Check Transmitter Safety FeaturesTransmitter Wall Bracket Timer OperationTransmitter Battery Life General InformationService Parts

SMART-BATT-II specifications

Hearth and Home Technologies has revolutionized the way we think about heating technology with its SMART-BATT-II system. This innovative product is designed to enhance efficiency and convenience in home heating. The SMART-BATT-II is a state-of-the-art battery backup system that ensures uninterrupted performance for your heating appliances, providing homeowners with peace of mind during power outages.

One of the standout features of the SMART-BATT-II is its advanced energy management system. This technology optimally manages power supply to the unit, allowing it to utilize energy from both the grid and backup sources. The system can intelligently switch between these power sources, ensuring that your heating appliances remain operational even when the electricity goes out. This capability is especially valuable in areas prone to outages, enabling families to maintain warmth and comfort during inclement weather.

The SMART-BATT-II utilizes high-capacity lithium-ion batteries, which are known for their durability and long life. These batteries provide enough backup power to operate heating systems for extended periods, offering an essential lifeline when traditional power sources are unavailable. The unit is equipped with smart charging technology, ensuring that the batteries recharge efficiently and extend their lifespan.

Another significant characteristic of the SMART-BATT-II is its user-friendly interface. Homeowners can easily monitor the battery status, power usage, and system performance through a simple display screen. Additionally, the system offers remote access capabilities, allowing homeowners to control and manage their heating system from anywhere via smartphone or tablet. This feature significantly enhances user convenience and facilitates better energy management.

Safety is also a priority with the SMART-BATT-II. The system includes built-in safety features such as overcharge protection and thermal management, ensuring that the unit operates safely and efficiently. Hearth and Home Technologies have also designed the SMART-BATT-II to be compact and easy to install, making it suitable for a wide range of home heating systems.

In summary, the SMART-BATT-II by Hearth and Home Technologies represents a significant advancement in home heating technology. With its robust energy management capabilities, high-capacity batteries, and user-friendly features, it provides a reliable and efficient solution for homeowners seeking consistent warmth and comfort. This innovative system is not just a backup; it is a forward-thinking solution designed for the modern home.
Top Page Image Contents