Hearth and Home Technologies SMART-BATT-II Matching Security Codes, Operating Instructions

Page 8

1.LOW - Battery power low. Replace batteries within two weeks.

2.TIMER - Indicates time remaining before system shuts off, when timer-programmed, 9 - hour maximum setting.

3.MODE - Indicates operation MODE of system. ON indicates the system is on, either manually or thermostatically. THERMO indicates the system will automatically cycle ON/OFF, depending on programmed SET temperature. OFF indicates the entire system is turned off.

4.SET - Indicates desired SET room temperature for THERMO operation.

5.FLAME - Indicates burner/valve operational.

6.CLOCK - Indicates the current time in AM/PM.

7.ROOM - Indicates CURRENT room temperature.

8.OF - Indicates degrees Fahrenheit (0C indicates de- grees Celsius).

LCD DISPLAY SCREEN

3

 

 

 

THERMO

OFFON

 

 

 

1

 

 

 

 

7

 

 

 

F

F

 

 

 

4

 

 

 

 

 

 

 

 

 

 

 

ROOM

SET

 

8

 

 

 

 

 

 

 

 

6

 

 

 

AM TIMER

 

 

 

 

2

 

 

 

 

 

 

 

 

MODE

SET

UP

TIMER

DOWN

TIME

 

5

Figure 12. Transmitter LCD Display Screen

FLAME

MATCHING SECURITY CODES

It may be necessary to program the remote receiver to the security code of the transmitter upon initial use, if batteries are replaced, or if a replacement transmitter is purchased from your dealer. To program the remote receiver:

1.Set the slide button on the receiver to the REMOTE position.

2.Push the LEARN button (one beep will be heard) on the top of the remote receiver.

3.Then press the MODE button on the transmitter. Sev- eral beeps indicate the transmitter’s code has been pro- grammed into the receiver. When an existing receiver is matched to a new transmitter, the new security code will overwrite the old one. NOTE: When the LEARN but- ton is depressed, “beeping” sounds should be heard.

If you are unsuccessful in matching the security code on the first attempt, wait 1-2 minutes before trying again.

OPERATING INSTRUCTIONS

To operate the system, press the MODE button (Figure

12)on the transmitter to select the operational MODE de- sired.

•ON indicates the system is on, either manually, timed or thermostatically.

•THERMO indicates the system will automatically cycle ON/OFF, depending on programmed set temperature.

•OFF indicates the entire system is turned off.

Transmitter Settings

Flip open the plastic cover on the front of the transmitter to expose the “SET” buttons.

NOTE: Flashing numbers on the display indicate the sys- tem is waiting for input, such as using the UP and DOWN buttons to program a new setting. If no change is made to flashing digits within 15 seconds, the system will complete the procedure last programmed and reset the display to its normal state.

Setting the Clock

1.Press and hold the TIMER/TIME button on the transmit- ter for more than two seconds. The hour digit(s) will be- gin flashing (see Figure 12, Location #6).

2.Press the UP or DOWN button until the desired hour is displayed in AM or PM.

3.After setting the desired hour, press and release the TIMER/TIME button again to set the minutes; the minute digits will begin flashing.

4.Press the UP or DOWN button until the desired minutes are displayed.

5.Press and hold the TIMER/TIME button again for more than two seconds. The time digits will cease flashing, indicating the clock has been successfully set. You may also press the SET button on the transmitter to stop the time digits from flashing and set the time.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Canadian Equipment Requirements Installation PrecautionsIntroductionfccce Requirementsrequirements Receiver Wiring Instructions Wiring Millivolt ValvesWiring Millivolt Valve with Rocker Hearth MountWiring Millivolt Valve with 3-Wire Assembly Millivolt with Rocker Switch and ReceiverWiring Intermittent Pilot Ignition IPI with Rocker Switch Millivolt with ReceiverRemote Intermittent Pilot Receiver Ignitor Wiring Intermittent Pilot Ignition IPI with 3-Wire Assembly Remote Receiver Slide Switch TransmitterTransmitter Settings Setting the ClockMatching Security Codes Operating InstructionsSetting 0F/0C Scale Setting Desired Room Temperature Thermo OperationsSetting the Countdown Timer Transmitter Low/Battery IndicatorTransmitter Safety Features System CheckTimer Operation Transmitter Battery LifeGeneral Information Transmitter Wall BracketService Parts

SMART-BATT-II specifications

Hearth and Home Technologies has revolutionized the way we think about heating technology with its SMART-BATT-II system. This innovative product is designed to enhance efficiency and convenience in home heating. The SMART-BATT-II is a state-of-the-art battery backup system that ensures uninterrupted performance for your heating appliances, providing homeowners with peace of mind during power outages.

One of the standout features of the SMART-BATT-II is its advanced energy management system. This technology optimally manages power supply to the unit, allowing it to utilize energy from both the grid and backup sources. The system can intelligently switch between these power sources, ensuring that your heating appliances remain operational even when the electricity goes out. This capability is especially valuable in areas prone to outages, enabling families to maintain warmth and comfort during inclement weather.

The SMART-BATT-II utilizes high-capacity lithium-ion batteries, which are known for their durability and long life. These batteries provide enough backup power to operate heating systems for extended periods, offering an essential lifeline when traditional power sources are unavailable. The unit is equipped with smart charging technology, ensuring that the batteries recharge efficiently and extend their lifespan.

Another significant characteristic of the SMART-BATT-II is its user-friendly interface. Homeowners can easily monitor the battery status, power usage, and system performance through a simple display screen. Additionally, the system offers remote access capabilities, allowing homeowners to control and manage their heating system from anywhere via smartphone or tablet. This feature significantly enhances user convenience and facilitates better energy management.

Safety is also a priority with the SMART-BATT-II. The system includes built-in safety features such as overcharge protection and thermal management, ensuring that the unit operates safely and efficiently. Hearth and Home Technologies have also designed the SMART-BATT-II to be compact and easy to install, making it suitable for a wide range of home heating systems.

In summary, the SMART-BATT-II by Hearth and Home Technologies represents a significant advancement in home heating technology. With its robust energy management capabilities, high-capacity batteries, and user-friendly features, it provides a reliable and efficient solution for homeowners seeking consistent warmth and comfort. This innovative system is not just a backup; it is a forward-thinking solution designed for the modern home.
Top Page Image Contents