Bed Redefiner 17
Operator's Manual
8.If shield clogs with mud or debris, do not hit unit against hard surfaces to clean, or damage to unit may occur. Stop engine and unclog shield with a suitable tool.
Important
Be sure blade has completely stopped spinning before setting unit on concrete or other hard surface. Never allow spinning blade to contact hard surfaces. Carbide teeth on blade can break, or damage to surface can occur.
warning
The complete unit, specifically the drive shaft assembly and muffler exhaust area may become very hot during use. Avoid contact during and immediately after operation, otherwise serious personal injury may result.
edging operation
WARNING
Before edging, be sure to read and understand the entire Operator’s Manual and Safety Manual to avoid the chance of serious personal injury.
1.Before edging, water the area to soften the ground to make edging easier.
2.Before edging, check the area and remove all obstacles and objects that could be thrown.
3.Plan to edge regularly to make it easier to keep a neat edge and to avoid having to make more than one pass.
WARNING
Never adjust blade height or clear debris from shield with engine running, otherwise serious personal injury may result.