Echo BRD-280 manual Long Term Storage over 30 days

Page 28

28

Storage

warning

During operation the muffler or catalytic muffler and surrounding cover become hot. Always keep exhaust area clear of flammable debris during transportation or when storing, otherwise serious property damage or personal injury may

result.

Long Term Storage (over 30 days)

Do not store your unit for a prolonged period of time (30 days or longer) without performing protective storage mainte- nance which includes the following:

1.Store unit in a dry, dust free place, out of the reach of children.

DANGER

Do not store in enclosure where fuel fumes may accumulate or reach an open flame or spark.

2.Place the stop switch in the "STOP" position.

3.Remove accumulation of grease, oil, dirt and debris from exterior of unit.

4.Perform all periodic lubrication and services that are required.

5.Tighten all the screws and nuts.

6.Drain the fuel tank completely and pull the recoil starter handle several times to remove fuel from the carburetor.

7.Remove the spark plug and pour 7 cc (1/4 oz.) of fresh, clean, two-stroke engine oil into the cylinder through the spark plug hole.

A.Place a clean cloth over the spark plug hole.

B.Pull the recoil starter handle 2-3 times to distribute the oil inside the engine.

C.Observe the piston location through the spark plug hole. Pull the recoil handle slowly until the piston reaches the top of its travel and leave it there.

8.Install the spark plug (do not connect ignition cable).

Image 28
Contents Bed Redefiner Safety manual Table of ContentsIntroduction Operators manualSafety Manual Safety Symbols and Important Information International symbolsPhysical Condition Eye ProtectionHand Protection Proper ClothingRepetitive Stress Injuries Read the ManualsEquipment EPA 2010 and Later and/or C.A.R.B. TierEmission Control exhaust & evaporative Hot Decal near muffler Shield Decal Shaft Decal Bed Redefiner Operator s Manual DescriptionPage Assembly ContentsDrive shaft/power head Throttle linkage and ignition leads Edger blade installation Support handleOperation Fuel RequirementsFuel Handling Fuel Mixing InstructionsStarting cold engine Purge BulbStarting warm engine Stopping engineOperating techniques Edging operation Wheel Adjustment Knob Increase Depth Decrease Maintenance intervals MaintenanceSkill level Air filter Fuel filterSpark plug Cooling systemSpark Arrestor Screen Exhaust systemExhaust Port Cleaning Carburetor adjustmentEngine Break-In High Altitude OperationDrive shaft lubrication Parts required NoneBlade replacement/lubrication Page Bed Redefiner Operators Manual Long Term Storage over 30 days StorageSpecifications Bed Redefiner Operator s ManualWarranty Statements Exceptions99922201032 12/03/09 99922201033 Bed Redefiner Operators Manual Page Bed Redefiner Operators Manual Service Warranty registration Additional or replacement manualsServicing Information parts/serial number Echo consumer product support