Echo BRD-280 manual Starting warm engine, Stopping engine

Page 15

Bed Redefiner 15 Operator's Manual

starting warm engine

The starting procedure is the same as Cold Start except DO NOT close the choke, and do not depress throttle trigger to wide open position.

warning

The attachment should not move at idle, otherwise serious personal injury may result.

NOTE

If attachment moves, readjust carburetor according to “Carburetor Adjustment” instructions in this manual or see your ECHO Dealer.

1.Stop Switch

Move stop switch (A) away from the STOP position

2.Purge Bulb

Pump purge bulb (C) until fuel will be visible and flows freely in the clear fuel tank return line. Pump bulb an additional 4 or 5 times.

3.Recoil Starter

Lay the unit on a flat area and keep movable attachment parts clear of all obstacles. Rapidly pull recoil starter handle/rope (D) until engine fires.

NOTE

If engine does not start after 5 pulls, use Cold Start Procedure.

A

C

D

stopping engine

1.Throttle

Release throttle and allow engine to return to idle before shutting off engine.

2.Stop Switch

Move stop switch (A) to STOP position.

A

warning

If engine does not stop when stop switch is moved to STOP posi- tion, close choke - COLD START position - to stall engine. Have your ECHO dealer repair stop switch before using edger again.

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Bed Redefiner Operators manual Safety manualTable of Contents IntroductionInternational symbols Safety Manual Safety Symbols and Important InformationProper Clothing Physical ConditionEye Protection Hand ProtectionRead the Manuals Repetitive Stress InjuriesEPA 2010 and Later and/or C.A.R.B. Tier EquipmentEmission Control exhaust & evaporative Bed Redefiner Operator s Manual Description Hot Decal near muffler Shield Decal Shaft DecalPage Contents AssemblyDrive shaft/power head Throttle linkage and ignition leads Support handle Edger blade installationFuel Requirements OperationFuel Mixing Instructions Handling FuelPurge Bulb Starting cold engineStopping engine Starting warm engineOperating techniques Edging operation Wheel Adjustment Knob Increase Depth Decrease Maintenance Maintenance intervalsSkill level Fuel filter Air filterCooling system Spark plugExhaust system Spark Arrestor ScreenHigh Altitude Operation Exhaust Port CleaningCarburetor adjustment Engine Break-InParts required None Drive shaft lubricationBlade replacement/lubrication Page Bed Redefiner Operators Manual Storage Long Term Storage over 30 daysBed Redefiner Operator s Manual SpecificationsExceptions Warranty Statements99922201032 12/03/09 99922201033 Bed Redefiner Operators Manual Page Bed Redefiner Operators Manual Echo consumer product support ServiceWarranty registration Additional or replacement manuals Servicing Information parts/serial number
Top Page Image Contents