CLEARING THE MEMORY
It is recommended that you clear the memory in the Learning SuperRemote before you start programming it:
1.Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button.
2.Press and release the LEARN key twice.
3.Press and release the SETUP key.
You can also clear the memory for just a particular mode (TV, VCR, etc.).
1.Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button.
2.Press and release the desired mode button (TV, VCR, etc.). The LED blinks once.
3.Press the LEARN key. The LED blinks once.
4.Press SETUP. The
LED turns off after a few seconds.
12 | 13 |