X10 Wireless Technology UR24A owner manual Controlling AN IR Mini Controller IR543

2.Press and hold SETUP until the LED indicator lights steadily. Release the Setup button.

3.Use the number buttons to enter the number equivalent to the chosen House Code (1=A, 2=B ..16=P).

4.Press the ENTER

button to confirm the House Code. The LED turns off.

Note: The Housecode you choose must match the Housecode on the Transceiver Module you are using it with.

CONTROLLING AN

IR MINI CONTROLLER (IR543)

If you already own an IR Mini Controller, you will need to change the X-10 Home Automation code in the remote to use it. The code for standard X-10 Home Automation is 013. The code to control the IR mini controller is 014. To change the code:

1.Press and hold SETUP until the LED indicator lights steadily. Release the SETUP button.

2.Press and release the X-10 button.

3.Enter 014 to control an IR Mini Controller, 013 for standard X-10 control. The LED turns off after the last digit entered.

Note: In most cases, you will not need to use the IR Mini Controller to receive commands from the UR24A Learning SuperRemote - the Transceiver Module does this for you and has the added advantage of working through walls. You can’t control the IR Mini Controller and the Transceiver Module at the same time.

34 35