X10 Wireless Technology IR32A owner manual Using The Remote, Sleep Macro Steps, Labeling Feature

Page 11

Using The Remote, cont.

Some icons will only provide On or Off functions, while some may provide dimming. It depends on the device’s capabilities. The example shown to the right has two X10 Home Automation devices, a camera base (VK74A Robotic Mount) and a module that turns an outside light on and off. Pressing the Side Key next to the camera icon displays an additional screen to control the actions of the camera (screen shown at the right).

Use the Side Keys to operate the camera by pressing the Side Key and holding it down for actions that require movement. The remote’s Main Keys can also be used to control a camera, according to the following:

OK/Select will center the camera.

UP, Down, Left, and Right navigation keys control the camera pan features.

CH up and down changes the camera focus.

VOL up and down will zoom the lens.

Numbers 1 - 5 can be use for camera presets.

In this example, the House icon has a Wall Switch Module associated with it. Press the Side Key next to the House icon, or use the Up and Down cursor keys to select the device, and then press OK. This displays the screen to the right that lets you turn the light on and off, and dim or brighten it (Lamp Modules and Wall Switch Modules only).

Or you you can select the device and then directly control it by pressing:

CH up and down to turn the light On and Off.

VOL up and down to Brighten and Dim it, if applicable.

20

Using The Remote, cont.

Labeling Feature

Two lines are available for labeling when you label an icon. The screen shown on the lower-right is an example of a TM751 labeled with a bath icon. The labels Bath and “Extra Bath” were associated with the icon. The following is an example of how to use the Label feature.

Press the HOME button to display the setup screen. Select Setup.

Select X10 using the Side Key.

Select Add/Edit at the next screen using the Side Key.

Choose the room where you will locate the TM751. For this example choose Basement. Press the side key to select.

At the add an X10 device screen, press OK.

Select Pick Device.

Select Appliances and then scroll until you see the TM751 icon. Select TM751 using the appropriate Side Key.

At the following screen select Label.

Use the appropriate Side Keys to create a Label. The Label feature can have two lines of labels. Enter each line of the label by pressing the Side Key for the line number, for example, 1 or 2, and then entering the label using the alphanumeric keys as shown.

After entering the label(s), select Save using the Side Key.

Select Done using the Side Key.

The Saving Settings screen appears and returns to the setup screen.

Sleep Macro Steps

Do the following to set up a Sleep Macro.

Set up an X10 device using the Wizard or Add-Edit mode, for example a light in your Living Room with an LM465 module.

Select Home/Setup/X10/More/Sleep Macro.

21

Image 11
Contents IconRemote FCC Caution Safety ConsiderationsIntroduction Table of ContentsHard Key Functions Hard Key Functions, Using the Wizard SetupBattery Installation Battery SaverSetting Up Your Devices, Setting Up Your DevicesHow to set up a TV Setting Up Your Favorites, Setting Up Your FavoritesDescription Setting Up Your Favorites, Setting Up X10 DevicesSetting Up Your Remote to Send RF commands WirelessSelect Pick Device Setting Up X10 Devices,Lamp Module Setting up an LM465 Lamp Module exampleUsing The Remote Extended FeaturesSleep Macro Steps Using The Remote,Labeling Feature Select Home/Setup/X10/More/Sleep MacroFavorite Key Mode KeyQuickPower Sleep Macro Steps,Learning SleepLearning, Learning Main Keys Macros Main Keys, Learning Main Keys,Learning a Macro Main Keys Learning Side Keys, Learning Side KeysLearning Macros Side Keys Learning Macros, Setting up more Favorites Setting up moreSetting up more Devices Setting up more,Reordering Favorites Adding/Editing FavoritesRenaming Favorite Groups Deleting FavoritesDevice Codes Clearing Settings in the RemoteAdvanced Settings OptionsPunchthrough, Advanced Settings,Programming Combo Device Codes PunchthroughAdvanced, then KidSafe KidSafeX10 Home Control X10 Macros, First method using a TM751 that was set up previouslySecond method using a TM751 that was set up previously X10 MacrosAt the add and X10 device! screen, press the OK key Audio and Video CompatibilityVoice Dialer Security Console Month Limited Warranty TroubleshootingPage IR32A-3/09