Setting Up Your Favorites
Once you’ve gone through the Wizard and set up at least a TV, and set up more devices, or skipped the rest of them, you arrive at screen (1) to the right.
Press any digit key, say digit 4, to enter a channel number. This takes you to screen
(2). You can enter more digits if desired. The channel number can include a dash
Press the Side Key next to Pick Logo on screen (2). You are shown a screen (3) of popular channel logos. You can select Next (Side Key 10) or Back (Side Key
5)to see more logos. In this example we pressed the NBC logo (Side Key 4). Screen (4) now shows that we’ve chosen channel 4 and the NBC logo. Note, you could also select the top left position which would display “4” as the favorite rather than a logo.
The Default device in this case was Sat, but you can select Pick Device to change it. In this case we changed it to Cable. Make sure you select the device that you want each favorite to control, e.g., TV, Cable, or Sat.
12
Setting Up Your Favorites, cont.
(1)
If you want to add a label to the logo, press the Side Key next to Label. This is optional so if you don’t want to add a label to the logo you can just select Save to save the setting for this favorite. If you save this favorite, Set Favorite 2 of 10 is now shown at the bottom of the screen to indicate that you can add another favorite channel. Again, just press a channel number key on the remote, choose a logo and change the Device Type (if you want to). Add a few more favorites (up to 10). You can add more later, or delete or edit them later, or even reorder their positions. Select Done when you’re finished setting up
(2)favorites.
If you select Label, you see the screen to the right with a small label on top of the logo. Initially the label will be the channel number for that logo. If you Save this, the logo will have a small label representing the channel number for that logo in it’s bottom right hand corner, see screen (5).
(3) | (5) |
But you can type in a new label if you want one. You enter the new name for the key using the numeric keys on the remote in a similar fashion to typing in text on a cell phone.
(4)
In this example, press the 5 key twice to enter the letter K. Then, wait a second, and then press the 4 key repeatedly until the letter I is displayed. Then, wait a second and press 6 to select N. Then, wait a second and press the 4 key to select G.
13