X10 Wireless Technology IR32A owner manual Learning, Learning Main Keys

Page 14

Learning, cont.

Learning Main Keys

•Check the IR transmitters/sensors are correctly aligned between the two remotes.

•Adjust the distance between the two remotes to be closer (e.g., half an inch) or a further away (e.g., 2 inches) from each other.

•Try learning the original remote keys again.

•If problems reoccur with the same key, check the original remote button being learned – does it transmit? Does it operate the target device?

You can learn commands from an existing remote and store them under the “Main” keys on the IR32A IconRemote, or learn commands from an existing remote and store them under any of the 10 side keys.

At the Home screen press the Side Keys next to Setup, More, and then Learn.

At the next screen press any of the five Side Keys K1-K5 on the left to learn commands under a Side Key, or press any of the top four Side Keys K6-K9 on the right to learn commands under the main keys on the remote.

If you press a right Side Key (to select Main Keys) you are going to learn, say, the Chan Up key from an existing remote and store it under the Chan Up key on the IR32A IconRemote. Or, learn the Power key from an existing remote and store it under the Power key on the IR32A IconRemote, etc.

If you press a left Side Key (to select Side Keys) you are going to learn, say, the “DVD Zoom” function from an existing remote and store it under a Side Key on the IR32A IconRemote. You will then be able to name the key “DVD Zoom” and access this “DVD Zoom” function from the Mode screen when the remote is in the mode that you selected when you learned this “DVD Zoom” command.

26

At the Home screen press the Side Keys next to Setup, More, and then Learn.

Then press one of the top four Side Keys K6-K9 to the right of the screen.

Select the Device you want to learn keys for. In this example we only have a TV, Cable Box and Satellite Receiver set up, so the rest are grayed out, but you can still select any of the devices to learn commands for. You are then instructed to line up the remotes, and press the key on the IR32A remote that you want to learn.

Then, point the remote you want to learn commands from at the bottom of the IR32A IconRemote, and press the key on the IR32A IconRemote that you want to learn a command under, e.g., the Power key.

27

Page 13 Page 15
Image 14
Page 13 Page 15
Contents IconRemote Safety Considerations FCC CautionTable of Contents IntroductionHard Key Functions Hard Key Functions, Battery Saver SetupBattery Installation Using the WizardSetting Up Your Devices, Setting Up Your DevicesHow to set up a TV Setting Up Your Favorites Setting Up Your Favorites,Wireless Setting Up Your Favorites, Setting Up X10 DevicesSetting Up Your Remote to Send RF commands DescriptionSetting Up X10 Devices, Select Pick DeviceExtended Features Setting up an LM465 Lamp Module exampleUsing The Remote Lamp ModuleSelect Home/Setup/X10/More/Sleep Macro Using The Remote,Labeling Feature Sleep Macro StepsSleep Macro Steps, Mode KeyQuickPower Favorite KeySleep LearningLearning, Learning Main Keys Macros Main Keys, Learning Main Keys,Learning a Macro Main Keys Learning Side Keys Learning Side Keys,Learning Macros Side Keys Learning Macros, Setting up more, Setting up moreSetting up more Devices Setting up more FavoritesAdding/Editing Favorites Reordering FavoritesDeleting Favorites Renaming Favorite GroupsOptions Clearing Settings in the RemoteAdvanced Settings Device CodesPunchthrough Advanced Settings,Programming Combo Device Codes Punchthrough,Advanced, then KidSafe KidSafeX10 Home Control X10 Macros First method using a TM751 that was set up previouslySecond method using a TM751 that was set up previously X10 Macros,At the add and X10 device! screen, press the OK key Audio and Video CompatibilityVoice Dialer Security Console Troubleshooting Month Limited WarrantyPage IR32A-3/09
Top Page Image Contents