— Operating the
Changing the AUX Device Layout
The AUX Device screen layout can be made identical to any of the other device buttons.
∙Enter the “LCD layout edit mode” for the AUX Device but- ton by pressing the AUX button for three seconds (this function is activated the same way as described in the previ- ous chapter “Changing the LCD Layout”).
∙When the screen flashes, press the device button of the de- vice you want to copy. This device layout is copied to the AUX button.
∙Press the AUX button again. You will hear three beeps and
Macro Function
The macro feature enables you to store up to 25 commands on any command button. When you have created a macro, you will be able to run a chain of commands by pushing only one button. You can assign macros to any regular button but not to device buttons.
When you assign a macro to a command button, the original function of the button will be lost. Therefore you should choose a button that you do not use in normal operation.
Do not use a device button as your macro run button. Using a device button will remove the button’s func- tion from the layout. For example, if you use the TV device button for the macro run key, you will not be able to use the
21