Vepro constantly controls the presence of sensors and videocameras and in case of alarm (generated by sensors), it captures the images coming before and after the alarm and sends them immediately to the control center to analyse the situation.
Vepro can be used also as a local videosurveillance system togheter with a specific storage unit equipped with an
In this way all the system can be remote viewed, at any time,through the EDGE connection or via LAN (for example through the ADSL router).
The surveillance center can display on the PC the events that caused the alarm or verify the live situation.
If a broadband connection is available (ADSL, UMTS), also the remote listening will be possible through the microphone on the videcamera.
TECHNICAL FEATURES
•
•
•
•1 input
•1 output
•Management of I/O input for alarms and activations
•Mailing of Pre & Post alarm images
•Management of MJPEG images
•Images resolution: 640 x 480 pixel max
•Management of up to 4
•Management of up to 20 SMART sensors
•
•10/100 4 ports switch
•Internal
•
SMART SENSOR
•433 MHz Wireless sensor
•Wired magnetic REED
•Vertical TILT sensor
•Sensors status check (magnetic and TILT) every seconds
•Alive message every 30 seconds
•Unique sensor via MAC address
•Battery low indication
•
|
| EDGE/GPRS | |
|
| Control Center | |
IP Camera 300 | Vepro | ||
INTERNET | |||
|
Smart Sensor
Images Storage Server
(FTP Server)
For further information
visit our website http://www.digicom.it