Hitachi 57F500A, 51G500A, 51F500A, 57G500A, 65G500 Connecting AN S-VIDEO Source to Input 3, 4

CONNECTING EXTERNAL VIDEO SOURCES

CONNECTING AN S-VIDEO SOURCE TO INPUT 3, 4 AND 5

1.Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.

4.Press the VID3~VID5 button to view the program from the VCR or laserdisc player. The VIDEO label disappears automatically after approximately four seconds.

5.Press the ANT button to return to the previous channel.

ANT A

			DVI-HDTV
		PR	PB	Y
	INPUT 1
TO		R	(MONO)/L
CONVERTER				AUDIO
		PR	PB	Y/VIDEO
ANT B	INPUT 2	R	(MONO)/L
				AUDIO
		R	(MONO)/L	VIDEO	S-VIDEO
	INPUT 3
		R	(MONO)/L	VIDEO	S-VIDEO
	INPUT 4
AUDIO
TO HI-FI		R	L	VIDEO
					S-VIDEO
L	MONITOR
	OUT
			AUDIO
R

FIRST TIME USE

OUTPUT

R L V

S-VIDEO

VCR

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output. (INPUT: 3 in example on page 11) Refer to your VCR operating guide for more information on line input-output connections.

17