Hitachi 50VS810 important safety instructions Connecting a Component Source to Input 1 or 2 Y-PBPR

CONNECTING EXTERNAL VIDEO DEVICES

FIRST TIME USE

CONNECTING A COMPONENT SOURCE TO INPUT 1 OR 2: Y-PBPR.

1.Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below.

2.Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack.

3.Connect the cable from the CR/PR OUT or R-Y OUT of the laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack.

4.Connect the cable from the AUDIO OUT R of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/R) jack.

5.Connect the cable from the AUDIO OUT L of the Laserdisc/DVD player or HDTV set top box to the INPUT (AUDIO/L) jack.

6.Press the the INPUTS button, then select INPUT 2 from the INPUTS menu to view the program from the Laserdisc/DVD player or HDTV set top box. The VIDEO OSD label disappears automatically after approximately four seconds.

7.Select Antenna from the INPUTS menu to return to the previous channel.

	ANT A
	ANT B		INPUT 2
			Y/
MONITOR OUT	INPUT 4	INPUT 3	VIDEO
S-VIDEO
			PB
			PR
VIDEO
	(MONO)	(MONO)	(MONO)
L
AUDIO		TV AS CENTER
R
AUDIO
TO HI-FI

CableCARD

(Top of card faces right)

	HDMI 1
INPUT 1
Y/
VIDEO
PB		OPTICAL OUT
		Digital Audio
PR	HDMI 2	Upgrade Card
		Apparatus Claims of U.S. Patent Nos.
		4,631,603; 4,577,216; 4,819,098;
		4,907,093; and 6,381,747 licensed
(MONO)		for limited viewing uses only.
		RS232C
		1	2	3	4	5
			6	7	8	9

OUTPUT

R L PR PB Y

DVD Player

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2. See page 14 for tips on REAR PANEL CONNECTIONS.

20