HOOK-UP CABLES AND CONNECTORS
Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use
FIRST TIME USE
300-Ohm Twin Lead Connector
This outdoor antenna cable must be connected to an antenna adapter
Phono Connector
Used on all standard video and audio cables which connect to inputs and outputs located on the television’s rear jack panel and front control panel.
“F” Type 75-Ohm Coaxial Antenna Connector
For connecting RF signals (antenna or cable TV) to the antenna jack on the television.
S-Video (Super Video) Connector
This connector is used on camcorders, VCRs and laser- disc players with an
1 2 3 4 5
6 7 8 9
D-SUB MINI 9-Pin Cable
This cable is used to connect to the RS232C input located on the rear panel so you can control some of your TV functions from an external home control system.
HDMI Cable
This cable is used to connect your external devices such as Set-
ANTENNA CONNECTIONS TO REAR JACK PANEL
VHF (75-Ohm) antenna/CATV (Cable TV)
When using a
VHF (300-Ohm) antenna/UHF antenna
When using a
When both VHF and UHF antennas are connected
Attach an optional antenna cable mixer to the TV antenna terminal, and connect the cables to the antenna mixer. Consult your dealer or service store for the antenna mixer.
6
To outdoor antenna or CATV cable
To second antenna or cable system
To outdoor VHF or UHF antenna
ANT A/ANT B | From outdoor |
From UHF antenna | antenna or |
CATV System |
Antenna Mixer