Hitachi 57F510 Setup, On-Screen Display, Adjustment Point Cursor, To Move Adjustment Point

SETUP

Manual Convergence Adjustment Mode (117 Point Manual Adjustment)

NOTES: 1. Please turn ON your television for at least 20 minutes before using this feature.

2.Auto Adjustment Mode is recommended. If convergence is still not acceptable, use the Manual Adjustment Mode.

3.If Auto Adjust mode is selected or the Magic Focus button is pressed, all manual adjust mode settings will be erased.

Using the Remote Control, select SETUP-MAGIC FOCUS TUNE UP-MANUAL ADJUSTMENT MODE-117 POINT MANUAL-START to access convergence 117 point pattern. The adjustment point is indicated by the Adjustment Point Cursor.

To Move Adjustment Point

To move the adjustment point cursor using the CURSOR buttons, the Adjustment Cursor must be WHITE. Another way to move the Adjustment Point Cursor is to press the following buttons: [2] up, [4] left, [5] down, [6] right. If you use the number buttons while the adjustment point is WHITE, it will change to RED.

To Change the Color of Adjustment Point

Press the SELECT button repeatedly (WHITE-RED-BLUE-WHITE...). Green color is fixed and cannot be adjusted.

To Adjust the Convergence

Move the Adjustment Cursor to the point to be adjusted. Use the CURSOR buttons to match the RED and BLUE colors to GREEN (reference color). Properly aligned, all three colors should appear white.

Video

Audio

Aspect

Chan. Manager

Locks

Timers

Setup

Move SEL Sel

Setup

Magic Focus Tune Up

Menu Preference

Set The Inputs

Set Virtual HD

Set Black Side Panel

Set Closed Captions Set Monitor Out

Set AV Control

About Your TV

Move SEL Return

ON-SCREEN DISPLAY

Adjustment Point

Cursor

Setup

Magic Focus Tune Up

Aligns the Red, Green, and Blue colors to correct for Magnetic Influences.

Adjustment Mode

Auto

9 Point Manual

117 Point Manual

If you want to adjust now Start

Move SEL Return

If convergence is acceptable after Manual Convergence adjustment, press EXIT button to access menu mode.

Setup

Magic Focus Tune Up

Manual Adjust

Please make a selection from the options below

Cancel

Done

Back

Reset

Move SEL Select

Use the CURSOR buttons to highlight your chosen option. Press the SELECT button to select.

Select CANCEL to cancel adjusted data and return to main picture.

Select DONE to save your adjustments and return to the main picture.

Select BACK to return to the manual convergence adjustment mode.

Select RESET to recall the factory pre-set convergence data.

58