CHANNEL MANAGER
NOTES: 1. Auto Channel Scan must be performed first when using ANT C for the first time.
2.When in ANT C, only channels stored in Channel List during Auto Channel Scan can be tuned using the number buttons on the remote control (see pages
3.When
(see page 55).
4.Turning the power off while executing Auto Channel Scan will only store channels scanned before the power interruption.
5.If your ANT C source is an antenna, repeat Auto Channel Scan everytime antenna position/direction is changed.
6.Channel availability in ANT C depends on the broadcaster. Certain channels that are available during the day may not be available at night.
54