Hitachi 57S700, 65S700, 51S700 important safety instructions Vhs

CONNECTING EXTERNAL VIDEO SOURCES

FIRST TIME USE

CONNECTING A COMPONENT SOURCE WITH DVI-HDTV CAPABILITY TO INPUT 1

1.Connect the DVI connection cable from the output of the HDTV set top box or DVD player to the DVI-HDTV input as shown on the TV set below.

2.Connect the cable from the AUDIO OUT R of the HDTV set top box or DVD player to the INPUT (AUDIO/R) jack.

3.Connect the cable from the AUDIO OUT L of the HDTV set top box or DVD player to the INPUT (AUDIO/L) jack.

4.Press the VID1 button to view the program from the HDTV set top box or DVD player. The VIDEO OSD label disappears automatically after approximately four seconds.

5.Press the ANT button to return to the previous channel.

D-VHS

RL

OUTPUT

DIGITAL OUTPUT

ANT A

TO CONVERTER

ANT B

AUDIO

TO HI-FI

CENTER

IN

L

R

			DVI-HDTV
			Y
INPUT 1
	R	(MONO)/L
			AUDIO
	PR	PB	Y/VIDEO
INPUT 2	R	(MONO)/L
			AUDIO
	R	(MONO)/L	VIDEO	S-VIDEO
INPUT 3
	R	(MONO)/L	VIDEO	S-VIDEO
INPUT 4
	R	L	VIDEO	S-VIDEO
MONITOR
OUT
		AUDIO

ANT C

(DTV)

IEEE1394

Multi Media

Card

OPTICAL OUT Digital Audio

NOTES: 1. Completely insert the connection cord plugs when connecting to rear panel jacks. The picture and sound that is played back will be abnormal if the connection is loose.

2.The DVI-HDTV input on INPUT 1 contains the copy protection system called High-bandwidth Digital Content Protection (HDCP). HDCP is a cryptographic system that encrypts video signals when using DVI connections to prevent illegal copying of video contents.

3.DVI is not a “NETWORK” technology. It establishes a one-way point-to-point connection for delivery of uncom pressed video to a display.

4.The connected digital output device controls the DVI interface so proper set-up of device user settings determines final video appearance.

18