Remote control

@ select switch

Your remote control has four layers: the TV layer, the VCR-A layer, the DVD layer, and the AUDIO layer. You can set up each of these layers to operate a

different piece of equipment. Use this switch to select the layer you want to set up or use.

@ power button (POWER)

Press this switch to turn the TV on or off.

3(_ number buttons (0-9)

Use to select a channel number or to enter a parental lock code.

® channel control (CHANNEL)

Press the top part of the button to change to a channel with a higher number; press

the bottom part to change to a channel with a lower number.

(_) SuperQuickView TM button (SQV)

Press to view channels you have

programmed into SuperQuickView TM memory.

@volume control (VOLUME)

Press the top part of the button to in- crease the volume. Press the bottom part of the button to decrease the volume.

(7)input button (INPUT)

Use to select the input source you wish to watch:

•TV channels on Antenna A or Antenna B

•Other equipment connected to Input 1, 2, or ;3.

@QuickView'"	button		(QV)
Press this	button	to	instantly	switch	to
the channel	that	you	designated	as	the
Quick View TM channel.			Press again		to
return to the last		channel viewed.

buttons and functions (cont.)

@QuickProgram (QUICK PROG.)

Use this button to directly display the VCR menu for recording or to return to your TV from QUICK PROG. recording. You must be in the VCR layer.

E> Important:

You must connect a Mitsubishi VCR to your TV with an AV Network cable to use this feature and both your TV and VCR must be set to the actiw_ system one setting.

@)mute control (]YKITE)

Use to turn the ,_ound off completely or to restore it to its original volume.

@ enter/exchange button (ENTER/

EXCH)

Use this button after selecting a channel number, after sdecting an item from the on-screen menu system, or with the

picture-in-picture mode.

(_) information button (INFO)

Use to view all on-screen summary of the current settings for the TV or AUDIO functions and the display related to Extended Data Services

(XDS). .,

_)light button

Use to light up the remote (for 3 sec- onds).

@adjust buttons (J, • • b)

After selecting an audio or video func- tion, use these buttons to adjust the sound or picture,. Also use these with

the picture-in-picture mode and to select items :in the menus.

(_cancel button (CANCEL)

This button is used to cancel a channel number, to clear a channel programmed

into SuperQuickView" memory, and to clear the settin_:s of some on-screen menus.

18	Chapter 1: Getting to Know Your TV