Mitsubishi Electronics VS-45502, VS-50502 Using the Active A/V Network Feature, Before you begin

Using the Active A/V Network Feature

:Important:

Important:

This AN Network is a special feature that makes it easier to use your television and other Mitsubishi A/V components together. When you connect the A!V Network, you can po!nt the remote control at the television, and it will pass the remote control com- mand to other components.

You will gain even more benefits if you have a Mitsubishi VCR

equipped for the Active A/V Network. The Active A/V Network allows you to perform many of the commonly used features of your system at the press of just one button.

This section explains the various features of the Active A/V Net- work.

before you begin

You must have connected an A/V Network cable from the Active A/V Network terminal of your TV to the A/V Network IN

terminal of your VCR. See TV+Mitsubishi Products that Have A/_ z Network Terminals in Chapter 2.

•You must have connected your VCR to INPUT-1 of your TV.

•You must have set your "TV A/V Network " setting to "Active"

or "Basic". See Setting the A/VNetwork in Chapter 3.

•Your VCR' s remote control settings should be set to "VCR-A".

•Your VCR video mute setting should be turned ON.

what the Active A/V Network does

The Active AJV Network makes it easier and faster to use the VCR Quick Program and Play commands and the TV PIP commands.

When using the Active A/V Network, you should always point your remote control at your television.

If the TV is not receiving a signal on INPUT-l, it will automati-

cally turn off in about ten minutes. If you use a TV menu during this time, the TV will turn off in about five minutes atter you stop using the menus.

96 Chapter 4: Using the Special Features