MODELS:
2.Install the Deflection Yoke on the CRT neck. [Figure
3.Install the Lens that was removed in steps 5 and 6 of Removal Of The CRT. [ Figures
a)Position the Lens so that the Label faces the direction shown in Figure
b)Install the mounting screws. [Figure
4.Install the
5.Insert the Optical Unit into the Light Box Assembly.
6.Insert the Anode Lead Wire into the Flyback Transformer.
7.
Figure
Figure
Adjustment procedures after replacing the CRT(s)
•CRT Cut Off / White Balance Adjustment
•Static Convergence Adjustment
•Dynamic Convergence Adjustment
Page 16