MODELS:
Items in the table below are set to following after Initalization.
AV MEMORY
AV MEMORY | All Inputs |
TINT | 31 |
COLOR | 31 |
CONTRAST | 63 |
BRIGHTNESS | 31 |
SHARPNESS | 31 |
COLOR TEMP | HIGH |
BASS | 31 |
TREBLE | 31 |
BALANCE | 31 |
SURROUND | OFF |
LEVEL SOUND | OFF |
4. LED Indicator Diagnostics
The “Power ON LED” provides an indication of the sets operation, and the possible cause of a malfunction.
1.Initial Control Circuitry Check
Immediately after the TV is connected to an AC power source:
•The LED flashes three times ... indicating the Microprocessor has initialized and is functioning properly.
•If the LED does not flash ... the Microprocessor is NOT functioning.
2.Error Code Operational Check
Pressing the front panel “INPUT” and “MENU” buttons at the same time, and holding for 5 seconds, activates the Error Code Mode. The LED flashes denoting a two digit Error Code, or indicating no problem
has occured since the last Initalization.
Note: The front panel buttons must used, NOT those on the Remote Control.
•The number of flashes indicates the value of the MSD (tens digit) of the Error Code.
•The flashing then pauses for approximately 1/2 second.
•The LED then flashes indicating the value of the LSD (ones digit) of the Error Code.
•The Error Code is repeated a total of 5 times.
Example: If the Error Code is “24”, the LED will flash two times, pause, and then flash four times.
3.Error Codes
The Error Code designations indicating a malfunction, or no malfunction, are listed below: “12” ... indicates no error has occured.
“21” ...
“23” ... Horizontal Deflection failure. “24” ... Vertical Deflection failure.
Page 19