Mitsubishi Electronics WD-62526 manual Operation of PIP and POP

34Chapter 3. TV Operation

Operation of PIP and POP

The picture-in-picture (PIP) and picture-outside-picture (POP) features let you view pictures from two different sources at the same time. The available combinations are:

	Analog channels
	Devices on Video or
View as either main	S‑Video inputs
	Devices on component
picture or sub-picture
	inputs
	Devices on either HDMI
	input
View as main picture	Digital channels received
only	from the ANT 1 input

To Use PIP/POP

•Press PIP/POP to activate the PIP/POP option.

•Repeatedly press the PIP/POP key on the TV remote control and within seconds of each press, the PIP/ POP cycles through the displays shown here.

To Turn Off PIP/POP

•Press PIP/POP repeatedly until the TV returns to full- screen mode.

•Wait at least 10 seconds after PIP/POP is on screen, then press PIP/POP again. The next time you activate PIP/POP, the last-used PIP/POP option will be dis- played.

Changing the PIP/POP Device

When PIP/POP is displayed, press PIP DEVICE to change the PIP/POP picture source device. Choose the picture source from a menu similar to the Device Selection menu (see figure 7).

Changing PIP/Side-by-Side Channels

When the sub-picture is from ANT 1, press PIP CH to scroll up and down through memorized channels.

Exchanging Program Images

Press EXCH to exchange the main picture and the PIP/ POP picture. Pictures from digital channels can only be shown as the main picture.

Moving a PIP Image

If no menus are on screen, press ADJUST to move the PIP display anywhere on the main screen.

		POP
."*/
	4JEFCZ4JEF	(Side-by-side
1*$563&
	4VC1JDUVSF	pictures)

"OU  9999	1*1 "OU 
4UBOEBSE
4UFSFP 4"1
571( %-47		PIP
427
	1*1
4VC1JDUVSF
Ant-1 2 XXXX
Standard
Stereo SAP
TV-PG DLSV
SQV1		PIP off

Figure 6. Press the PIP/POP key to cycle through the display options.

Freezing the PIP and Side-by-Side Pictures

Press PAUSE to freeze the PIP and side-by-side images. Press PAUSE again to return to a “live” image.

IMPORTANT

•The Side-by-Side feature cannot show the picture from the same device on both sides.

•Pictures from HDMI-1 and HDMI-2 cannot be shown together as main and sub-pic- tures

Downloaded from www.Manualslib.com manuals search engine