Mitsubishi Electronics WD-62526 manual Timer, Lamp Reminder, Software Version

Chapter 4. TV Menu Operations 43

Setup Menu, continued

When using the Auto option you may find that some channels send the incorrect time and the TV clock is reset every time you tune to those channels. To prevent unwanted clock resets, use the Auto setting to set the clock from a channel sending the correct time, then change the setting to Manual.

Timer

Figure 4

On/Off

The timer allows you to set a time when the TV will auto- matically change the channel and turn on. You select the time and day for the TV to turn on and the device and channel to display. At your preselected time, the timer will turn on the TV and this message will be displayed: “Press a button for the TV to stay on.” Press any button on the remote control within five minutes or the TV will turn itself off.

Figure 4. Timer menu

Set Day

Select the day or days that the TV will turn on auto-

matically. Press ADJUST to select Daily, Mon-Fri (Monday through Friday), or the individual days of the week.

Set Time

Press ADJUST repeatedly to slowly select the hour or press and hold to quickly select the hour. Press ENTER to move to the minutes options. Press ADJUST to select minutes.

Device

Press ADJUST to select the device to use when the timer turns on the TV. If the TV is already on, the timer will switch the TV to this selected device.

Channel

When ANT 1 is the selected device, you may select any

memorized channel. Press ADJUST to select the

channel and the TV will tune to this channel in memory when the timer turns it on. This includes sub-channels for digital choices.

Lamp Reminder

Select to reset the lamp reminder message after you have changed the lamp cartridge. Press ENTER, then press ENTER again to confirm reset of the lamp reminder. To have an accurate reminder that the lamp cartridge may soon need replacement, reset the lamp reminder only when you replace the lamp cartridge. See Appendix F for detailed information about changing the lamp.

Software Version

For servicing purposes it may be necessary to know the software version in your TV. This information is displayed on the Setup menu screen.

Downloaded from www.Manualslib.com manuals search engine