Mitsubishi Electronics WD-65000 manual Channel Menu Antenna, Channel, Memory, Name, and SQV

Part III : Setup

Channel Menu: Antenna, Channel, Memory, Name, and SQV™

Figure 1. Channel Menu

Antenna

(Figure 1)

Select Ant-A, or Ant-B. For each antenna, you can add or delete channels in memory, name channels, and add channels to the SQV (Super QuickView™) list.

Channel

(Figure 1)

Select the channel you want to add or delete from memory, name, or add to the SQV (Super Quick View™) list.

Memory

(Figure 1)

After all available channels have been memorized with Memorize Channels, page 33, weaker channels viewed with Ant-A or Ant-B can be added and unwanted channels can be deleted.

Use the CHANNEL button on the remote control to view memorized channels.

Name

(Figure 1)

Channels shown on Ant-A or Ant-B can be given names (up to four characters). Select the character by using { or } button, and press ENTER. To cancel the character, press CANCEL. After you enter a name, it will appear on the TV screen, next to the channel number.

SQV (Super Quick View™)

Using The Menu Screen

(Figure 1)

SQV (Super Quick View™) allows you to put together a list of your favorite channels from Ant-A and Ant-B. You can store up to 6 chan- nels in each of the 9 different memory banks. Once you have added a channel to the SQV memory, “SQV ” will appear under the chan- nel number on the TV screen.

SQV (Super Quick View™)

Using The Remote control

Viewing and changing SQV banks using the remote control:

1Press the SQV button.

2To change memory banks, press a number button within 5 seconds of press- ing the SQV button.

3Press the SQV button repeatedly to cycle through the channels available in that bank.

Adding SQV channels using the remote control:

1Use the CHANNEL or number buttons to select the channel you want to add to the current SQV memory bank.

2Press and hold the SQV button for about 3 seconds. When “SQV ” and the memory bank number appear under the channel number, the channel has successfully been added.

Removing SQV channels using the remote control:

1Press the SQV button repeatedly until you see the desired channel.

2While the channel number and SQV indi- cator are still displayed on the screen, press the CANCEL button. If the CANCEL button is not pressed before the SQV indicator disappears, the channel will not be removed.

3When the SQV indicator disappears, the channel has successfully been removed.

Antenna, Channel, Memory, Name, and SQV™

35