One for All SV-1100 manual Introduction, This Package contains

Page 1

Introduction

The ONE FOR ALL Remote Control Blaster (SV-1100) converts the Infra-Red (IR) signals from your Remote Control into Radio-Frequency (RF) allowing you to control your devices through doors, windows, floors and walls without having to worry about line of sight requirements (up to 30 metres, room to room). Simply connect the included RECEIVER to the corresponding device to receive the RF signals.

NOTE: this product may not work with remotes with metal housing or displays

This Package contains

ARF TRANSMITTER

B2/3 size AAA rechargeable battery

CAA size sleeve (if your remote control requires AA batteries)

DRECEIVER

EIR Eye cord cord (3 IR eyes, 2 Metres long)

FPower Adaptor

 

Installing the SV-1100 in 3 easy steps

 

Simply install the RF transmitter instead of one of the AAA or AA

1

batteries inside your remote control.

2

3

NOTE: You may have to change the position of the RF transmitter to have better RF performance.

Set the Selection Switch (on the back of the RECEIVER) to…

A : 58KHz (for few and very specific remotes)

B : 38KHz (most remote controls)

C : Sensitivity lower e.g. other equipment using 433.92MHz (external interference).

See section: “Interference”.

3.1Place the RECEIVER next to the corresponding device(s) you wish to control.

3.2Connect the IR Eye cord plug to the back of the RECEIVER and place the IR Eye on the receiving window (IR sensor) of the corresponding device.

NOTE: There are 3 IR Eyes to control 3 separate devices.

NOTE: Remove the adhesive tape on the bottom of the IR Eye to secure it on the front of the audio/video equipment IR sensor.

3.3Plug the Power adaptor in the wall socket and connect the DC connector to the back of the RECEIVER. The POWER LED on the top of the RECEIVER will illuminate.

WWW.ONEFORALL.COM

4

Page 1 Page 2
Image 1
Page 1 Page 2
Contents Batteries inside your remote control Installing the SV-1100 in 3 easy stepsSet the Selection Switch on the back of the Receiver to… IntroductionCA B Interference Recharging the 2/3 AAA size Battery

SV-1100 specifications

The One for All SV-1100 is a versatile indoor antenna designed to capture digital TV signals, offering a perfect solution for cord-cutters and television enthusiasts alike. Its sleek, modern design makes it an attractive addition to any home entertainment setup, while its advanced technology ensures reliable reception of both VHF and UHF channels.

One of the standout features of the SV-1100 is its powerful amplification capability. The built-in amplifier enhances signal strength, allowing users to enjoy a wider range of channels, particularly in areas where traditional antennas struggle to provide a clear picture. This amplification ensures that even users in fringe reception areas can access high-definition programming, making the SV-1100 an appealing choice for those in less optimal locations.

The antenna's design incorporates a unique, adjustable signal reception capability. The SV-1100 features a 360-degree rotation, enabling users to find the optimal angle for maximum signal acquisition. This flexibility is particularly useful in urban environments where buildings and other obstructions can disrupt signal quality. Additionally, the antenna's slim profile allows for easy placement on walls or windows, allowing for discreet installation.

In terms of compatibility, the One for All SV-1100 supports various television standards, including ATSC, ensuring it works seamlessly with most modern televisions. The antenna is also equipped with a coaxial cable and a convenient USB power supply for the amplifier, making setup quick and straightforward.

Another significant characteristic of the SV-1100 is its ability to receive both VHF and UHF signals. This dual-band functionality guarantees that users can access a wider array of channels available in their area, encompassing local networks, educational programming, and a multitude of entertainment options.

The One for All SV-1100 is built with user convenience in mind. Its lightweight construction allows for easy relocation, so users can experiment with different positions to optimize reception. Furthermore, the compact size means it won’t take up much space, making it ideal for apartments or smaller living areas.

In summary, the One for All SV-1100 combines sleek design with powerful technology to deliver an effective indoor antenna solution. With its advanced amplification, adjustable reception, wide compatibility, and dual-band support, the SV-1100 stands out as a practical choice for anyone looking to enhance their television viewing experience without the need for costly cable subscriptions.
Top Page Image Contents