One for All 24993 instruction manual Using Your Remote, Volume/Mute Control and Punch- Through

Using Your Remote, cont.

Volume/Mute Control and Punch- Through

This remote lets you select which device Mode controls your Volume/Mute buttons. The remote is initially set for all device Modes to use their own Volume/Mute control if present. If the programmed code has no Volume/Mute operation of its own then those buttons will punch-through control to the TV Mode device without needing to change to TV Mode.

Setting ALL Volume/Mute Control to any one Mode

This routine can set all Modes to “punch-through” to any one chosen Mode for Volume/Mute button control without the needing to change to that Mode.

1. Press and hold the SETUP button

until the red indicator turns on, then release the button.

2.Press and hold the MUTE button until the red indicator blinks off,

then release the button. 3. Press and release the desired

Mode button (TV, DVR, etc.) for Volume/Mute control, the red indicator blinks then stays on.

4. Press and release the MUTE

button and the red indicator turns off. The red indicator will blink rapidly for three seconds if the Mode you have selected has no Volume/Mute control.

All other Modes will now punch-through to your chosen Mode for Volume/Mute control.

11