One for All 24993 instruction manual Direct Code Entry

Page 7

Direct Code Entry

1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.

2.Press and release the desired mode button (TV, DVR, etc.). The red

indicator blinks, then stays lit.

3. Enter the 4-digit code from the code tables (on separate

sheet). Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.

4.With your device on, press ON/OFF. If the device turns off, no further programming is required. Note: If

some buttons do not operate your

equipment, try one of the other codes for your brand.

Write your codes down here for easy reference later.

Device	Device stored	Code


TV	TV
DVD
CBL/SAT
DVR/AUX

Image 7

Contents 24993 Table of Contents Code Setup SetupBattery Installation Battery SaverButton Functions Input Button Functions,SAT Functions DVD FunctionsDirect Code Entry Code Search Code Identification DVR/DVD Punch-Through Using Your RemoteControlling Devices with Separate Power On and Off Buttons Controlling Combo DevicesVolume/Mute Control and Punch- Through Using Your Remote,Setting ALL Volume/Mute Control to any one Mode Setting any Mode to use its own Volume/Mute Control Remote does not operate your product TroubleshootingRemote does not operate some features of your product Red Indicator blinks after you program a product codePage Day Limited Warranty Universal Remote