One for All 24993 instruction manual Code Identification

Code Identification

The Code Identification Feature allows you to identify the 4-digit library code stored under your device key. For example, if you want to find out what 4-digit code is stored under your TV device key, follow the six steps below:

1. Press and hold the SETUP button until the red indicator stays on. Release the SETUP button.

2. Press and release the desired mode button (TV, DVR, etc.). The red indicator blinks, then stays lit.

3. Press and release the SETUP button. The red indicator blinks once and remains lit.

4.To find the first digit for the code stored under the mode key pressed in step 2, press each

numeric key from 0-9in turn. The number that causes the indicator light to blink is the first digit in your code.

5.To find the second digit, repeat step 4.

6.Repeat step 4 again to find the third and fourth digits. This time the red indicator turns off and stays off.