One for All 24993 instruction manual Setting any Mode to use its own Volume/Mute Control

Page 12

Using Your Remote, cont.

Setting any Mode to use its own Volume/Mute Control

This routine can set any Mode to use only its own Volume/Mute control. Note - If your chosen Mode has no Volume/Mute functions of its own then the Volume/Mute buttons will do nothing.

1. Press and hold the SETUP button

until the red indicator turns on, then release the button.

2. Press and hold the MUTE button until the red indicator blinks off, then release the button.

3.Press and release the desired Mode button (TV, DVR, etc.), the red indicator blinks then stays on.

4.Press and release the VOL- button, the red indicator blinks then stays on.

5.Press and release the MUTE button and the red indicator turns off.

Your chosen Mode will now use its own Volume/Mute control.

Image 12

Contents 24993 Table of Contents Setup Battery InstallationBattery Saver Code SetupButton Functions Button Functions, InputDVD Functions SAT FunctionsDirect Code Entry Code Search Code Identification Using Your Remote Controlling Devices with Separate Power On and Off ButtonsControlling Combo Devices DVR/DVD Punch-ThroughUsing Your Remote, Volume/Mute Control and Punch- ThroughSetting ALL Volume/Mute Control to any one Mode Setting any Mode to use its own Volume/Mute Control Troubleshooting Remote does not operate some features of your productRed Indicator blinks after you program a product code Remote does not operate your productPage Day Limited Warranty Universal Remote