BOXLIGHT Pro6500DP manual Projecting AN Image Basic Operation, Turning on the Projector

Page 33

PROJECTING AN IMAGE (BASIC OPERATION)

Turning on the Projector

Once the projector is correctly located and the power cable and other connections are in place, it is important that the projector is powered on correctly in order to avoid damage to components and un- necessary wear and tear. Refer to the following guide to power on the projector.

1. Connect the power cable (A). Press the main power switch to the on ( I ) position as shown (B). All four LEDs light orange, then the Lamp1 and 2 LEDs turn off and the Warning LED lights green.

B

A

2. Press the POWER button once (see OSD Controls and Status LEDs on page 6). The Power LED flashes green and the internal cooling fan starts.

3. After approximately 10 seconds, the Lamp1 and Lamp2 LEDs light green and the Power LED flashes more rap- idly.

4. Once the power LED is lit a solid green, the projector is ready for use.

Note:

If any of the LEDs remain flashing or blink there may be a problem with the startup. Please refer to the Troubleshooting section on page 87.

– 25 –

Image 33

Contents Page Copyright Important Safety Information Prefface Main Features Table of Contents DLP Projjecttor-User’’s Manuall Regulatory Compliance Page Page Page Bottom view Lens Controls Top FeaturesOSD Controls and Status LEDs Power LED Component Serial Port Terminal Panel FeaturesDo not use this jack for anything other than intended use Remote Control Parts DLP Projjecttor User’’s Manuall Remote Control Remote Control Operating RangeProjector and Remote Control Buttons Inserting the Remote Control Batteries Setup and OperationPage Page Page Diagonal Inches m Screen Size Width Height Lens Distance Installing the Optional Color Wheel DLP Projjecttor User’’s Manuall DLP Projjecttor-User’’s Manuall Making Connections Connecting Your PC or Macintosh ComputerConnecting an External Monitor Connecting Your DVD Player with Component Output Connecting Your VCR or Laser Disc Player Turning on the Projector Projecting AN Image Basic OperationDLP Projjecttor-User’’s Manuall Selecting an Input Source Page Lens Shift Adjustable Range Page When finished, press Menu to return to the projected image Adjusting the Projector Level Optimizing an RGB Image Automatically Adjusting the Image Using AutoAdjusting Volume Up and Down Turning off the Projector After Use About Direct Power OffFreezing a Picture Turning Off the Image and SoundAdjusting the Focus/Zoom Manually Adjusting by Using the OSD Control PanelChanging Lamp Mode Changing Lamp Mode by Using the Projectors OSD Control PanelGetting Information Displayed as the defaultAdjusting Position/Total Dots/Fine Sync Correcting Keystone by Using the Remote Control Higher resolution than XGA narrows the adjustable range Preventing the Unauthorized Use of the Projector Locking the ProjectorUnlocking the Projector Using the Physical Lock Using the Kensington LockNavigating the OSD Using the MenusDLP Projjecttor-User’’s Manuall Menu Tree DLP Projjecttor-User’’s Manuall TitleHighlight Slide bar Exit Radio button Menu ElementsInput Menu Descriptions and Functions Image menu Adjust Menu Descriptions and FunctionsImage options menu Overscan ScreenVideo menu Noise reduction 3D Y/C separationProgressive Film Color matrixBasic Detail Setting Menu Descriptions and FunctionsGamma White balance Color correction Adjust the Keystone trapezoid see Keystone Setting Menu Descriptions and FunctionsLamp mode KeystoneLamp control Language Lamp intervalInstallation Communication speed Ceiling & RearDisplay time BackgroundPIN Code Lock Key lock Network SettingDynamicBlack RC sensorPC control Standby modeDhcp Network settingOption Power management Screen triggerFan control Message Default input selectFilter warning Search modeInformation Menu Descriptions and Functions Usage timeInput Network Page Cept Language, Background, Key lock, Security, Network Mode Reset Menu Descriptions and FunctionsPage Page Replacing the Lamps DLP Projjecttor-User’’s Manuall DLP Projjecttor User’’s Manuall Press the Ÿorź button to move to the Reset menu and press Resetting the Lamp Time CounterIndicator Messages TroubleshootingPower LED Common Problems and Solutions Tips for TroubleshootingLamp LEDs Image Problems Lamp ProblemsRemote Control Problems Audio ProblemsHaving the Projector Serviced Projector Specifications Optical SpecificationsNTSC, NTSC4.43, PAL, PAL-60/N/M/B/G/H/I, Secam Electrical SpecificationsMechanical Specifications Environmental ConsiderationsOptional Parts Cabinet Dimensions Pin Assignments of Mini D-Sub 15 Pin Input Connector RGB DVI Compatible Input Signal ListDLP Projjecttor User’’s Manuall PC Control Codes and Cable Connections PC Control Connector DIN-9POperation Commands Control Command DiagramRemote Commands Control SequenceData Range Set Value CommandScreen Trigger Overview Handling of the Address for Operation by Using a BrowserPreparation Before Use Operation singU Http BrowserDomain Configuring Network SettingsTest Mail Http/the projectors IP address/index.html Structure of the Http Server106 FCC Warning SafetyCertificationsCanada EN 55022 Warning