BOXLIGHT Pro6500DP manual Standby mode, PC control

DLP Projjecttor—User’’s Manuall

Standby mode

There are two standby modes available: Normal and Power-saving. Power-saving mode allows you to put the projector in the standby condition to consume less power than Normal.

Note:

Be sure to connect the projector and computer while the projector is in standby mode and before turning on the computer.

Select from the following:

ƒNormal

ƒPower-saving

Note:

The HTTP server functions are not available during Power-saving mode.

The MONITOR OUT function is not available during Power-saving mode.

Control through the PC Control connector and Network mode is not available during Power-saving mode. For PC control and Network mode of the projector it is recommended to leave the projector in the Normal mode.

Normal mode:	POWER indicator: Orange light
	WARNING indicator: Green light
Power-saving mode:	POWER indicator: Orange light
	WARNING indicator: Off

PC control

This function enables you to select the path for PC control (see PC Control Codes and Cable Con- nections on page 98).

Note:

In the Network mode, Communication Speed function is not available.

Select from the following:

ƒPC control

ƒNetwork

– 70 –