Black Box AC401A, AC400A manual Computer Cable

CHAPTER 3: Installation

Computer	Cable	Looks like
IBM or compatible	15-pin
with VGA Graphics Card
or IBM PS/2 with built-in
VGA or MCGA Graphics
IBM or Compatible	9-pin
with EGA or CGA
Graphics Card or
Classic Style Macintosh

Macintosh II Series or	15-pin
Macintsoh LC, Apple IIGS

Fig. 3-3. Selecting the Proper “Y” Cable for Your Computer.

Refer to Appendix A for additional important information on how to properly place a Projection Panel on an overhead projector.

4.Follow the instructions in this table to select the proper “Y” cable for your computer:5.

Connect the 26-pin end (marked LCD) of the “Y” cable to the Projection Panel.

NOTE

Skip step 6 if you are connecting to a classic-style Macintosh.

6.Unplug the computer monitor cable from the graphics card. Plug the monitor to the short end (marked Monitor) of the Projection Panel cable to the computer monitor.

7.Plug the long end of the Projection Panel cable (marked for the appropriate computer) to the computer’s video port.

8.Tighten the thumb screws on the cable connectors to ensure proper grounding.

11 11